I need help,
Anyone have a running map for 550/1600’s with a 3 bar map sensor? Turbo size doesn’t matter I just need a map that will start the car. I’ve got my hands on a laptop that connects to the haltech, and I loaded a map I got off the hitmans site, but still no start. Weird thing was the zero throttle map was disabled, and the full throttle map was disabled. Now since my knowledge of the haltech has gone back to preschool, I read somewhere about zero-ing the timing. I’m hoping its something small since I don’t feel like pulling apart the harness.
On the engine data page it would appear everything is working the way it should, shows 1388rpm or so cranking rpm, 13.4volts, Tps works, injector pulse, injector duty is around 3-4% during the cranking. Fuel press is around 39psi static, I have spark, after a few times cranking I had a slight odor of fuel on the plugs, but nothing out the exhaust.
Sorry to post in here but I’m way lost and the haltech forum gets no traffic

If anything is wired wrong I’m blaming it on Keith and the Magic Hat #9 -JK-


But seriously if anyone can send me a working map id love ya

 

PM Demetrios for my old map. I don't have it or I'd give it to you.

 

i could get you help if you weren't so goddamn far away!

 

Len,
I am heading to MD today and may be back tonight early enough to swing by. If not maybe thursday afternoon? lmk your schedule.

 

Thanks guys,

What’s D’s Name on here?

Keith, here’s my slave (work) schedule, typically the 9pm nights turn into 9:30/10pm but I can get out early if need be.

Monday 8:30 till lockup
Tuesday 1:00pm till 9
Wednesday 9-9
Thursday 9-9
Friday OFF
Saturday 8-6
Sunday Off

Basically Tuesday morning, Fridays, or Sundays are best. Or any night except for Monday. If tomorrow after noon is best for you ill see if I can sneak away from work for a few hrs. However it works best for you, it’s been almost 4 years a few more days aren’t going to kill me.