I am trying to wire in my LT8S into my FC with a Painless wiring kit. The guy I bought the LT8S from didn't give me any diagrams or software that I can use to find a Microtech wiring diagram, so i was wondering if anyone had some uploaded.


Its a real easy job, I just want to do it right the first time, instead of guessing and crap like that.


Thanks guys.

 

Oh yeah forgot to mention, the Microtech is already wired up to my engine. I just took everything out of one car and put it into my car. Before I amke any assumptions I need to know what wiring i need to combine from my chassis (Painless) to my Microtech (LT8S). THe painless harness is full wired to my chassis, and the fuel pump works, power, aux, ignition, etc.


DO i just wire the Switched Ignition, and constant power to 2 wires on the Microtech (i'm not gonna make any color assumptions) and then ground the Microtech, and everything should be fine? Is there any more "combining" that i need to do of the LT8S and the wired chassis?

 

wiring diagrams can be found at microtechefi.com

 

Hey, I'll double check i did everything right, I basically just sat there and looked... things are pretty obvious. Hardest parts were just converting **** from when the car had an SR20DET in it. Starter and alternator are totally different.

 

http://www.microtech-efi.com/downloads/17.pdf