I need screens shots for a microtech so I can put a base tune on my car.

My car has
MIcrotech ltx8s with 4 bosch coils and AEM ignition
Semibridge ported motor
GT40R turbo kit
1600cc injectors 1000cc injectors
kg parts rails
aeromotive a1000 fuel pump
greddy 3 row
and all other supporting mods

can someone email me something, because I am looking to get the car started next weekend.

Thanks
Edan

 

Is no one willing to help??? PLEASE JUST LOOKING FOR SETTINGS TO GET IT STARTED

 

You may want to take a look in the engine management forums instead of here. You also need to include more details, like your base fuel pressure, FPR type, and the Microtech people will also need to know about your CAS, TPS setup, etc. I hate to say this but your injectors may just be too big. I'll be surprised if you can get that thing to idle without stumbling under 2k rpm. A 550/1600 would have done you fine; with 1000/1600 you're not going to breach 50% duty cycle at as much as 450 HP.

 

Well.... I'll I am trying to do is get the thing to start. I will worry about the tunning later. As for moving this to the microtech forum... I already have threads going here and no one has answered them. THat is why I posted in the single turbo forum and the 3rd gen forum.

 

as long as you don't boost it you should be able to start it on the base map that comes preloaded on the microtech (unless you deleted it).

 

Was unaware that it came with base maps... I was under the impression, that I had to imput all the variables. I'll check with the people I got it from to make sure this is the case.

Thanks
Edan