microtech 2 bar stock map sensor
 

After looking at the software for the first time last night, it was a 3 bar setup that had data point up to 28 psi. With the stock 2 bar sensor in the microtech, what does it go up to? 15 roughly? If so, whats it peak psi range, not the 28 psi hopefully.

Tim

Its actually a 2.5 bar map sensor and the maps go to 20psi.

Dale

so what's the upper data point for it? if it goes to 20 psi, you don't need for maps that go to 28. Does it drop down to 20 psi for the upper limit, giving you better resolution up to 20?

Tim

Tim.
The standard ecu & the 3 bar have the same number of load points but on thye 3 bar version the vacuum side points are spaced further apart to allow for a few more in the 20-30psi range.
Jon

Thats what I was wondering and thanks for the answer. Brandon and Ray both impressed me with the ecu, but I still had a couple of questions.

Thanks

Tim