Microtech LTX12 question
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
I was just going to post that. In theory, you could use the AUX output to control a boost solenoid from another car (or the S5)...But it would suck. Best is a dedicated boost controller.
if you are using a LTX12 with the wide band etc, it can control boost and idle, just specify when ordering your ecu, my ecu has the boost control, idle control, 3 bar, wide band etc
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Originally posted by 10sec rx7
if you are using a LTX12 with the wide band etc, it can control boost and idle, just specify when ordering your ecu, my ecu has the boost control, idle control, 3 bar, wide band etc
if you are using a LTX12 with the wide band etc, it can control boost and idle, just specify when ordering your ecu, my ecu has the boost control, idle control, 3 bar, wide band etc
being a microtech dealer in AU mine came direct from them,
your ecu's that come into the USA already have the wideband logging etc on them, it will just be a matter of telling your dealer to order the boost and idle control on the spare 2 ign outputs, these get changed to pwm outputs and you have a dial you can fit to your dash for the boost control.
Dale
your ecu's that come into the USA already have the wideband logging etc on them, it will just be a matter of telling your dealer to order the boost and idle control on the spare 2 ign outputs, these get changed to pwm outputs and you have a dial you can fit to your dash for the boost control.
Dale
Trending Topics
you will have to contact your dealer in the US, try Rolo at central florida turbo, he can advise on the cost of extra options, they wont be very much as they just have to configure the spare IGN outputs.
Dale
Dale
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM



