RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Microtech (https://www.rx7club.com/microtech-111/)
-   -   Microtech i want my engine to start right away. (https://www.rx7club.com/microtech-111/i-want-my-engine-start-right-away-485343/)

rx7theone 11-25-05 06:56 PM

i want my engine to start right away.
 
Ive Been messing Around With The Water And Cranking Modes And I Can Get The Car To Start But It Takes About 5 Or 6 Crankings Before It Starts. I Have 550cc Primeries And 1600cc Sencondaries My Vacum And Compresion Are Fine But I Just Cant Get It To Start Right Away. What Could It Be Someone Help Me Please I Have The Lt8s Computer And My Car Is A 93 R1. Thanks.

tai-pan 11-26-05 06:58 PM

dude, i have the same problem. it would be nice to see if someone actually knows what to do. hopefully we don;t get beat up too bad.

Spooledup300z 11-27-05 12:07 AM

Try fatting up your crank fuel... start low and then slowly increase. I also hope you guys know that the Temp outside has a huge part to do with this, the hotter it is the less fuel it needs, the colder the more fuel it needs. Just try messing with the crank and water temp fuel. I had this problem in my Z now it starts after 4-5secs of cranking

good luck

rx7theone 11-27-05 05:49 PM


Originally Posted by Spooledup300z
Try fatting up your crank fuel... start low and then slowly increase. I also hope you guys know that the Temp outside has a huge part to do with this, the hotter it is the less fuel it needs, the colder the more fuel it needs. Just try messing with the crank and water temp fuel. I had this problem in my Z now it starts after 4-5secs of cranking

good luck

thats how long it takes right now i just know that it should start in 3 secons or less. i have a friend with a first gen and his starts in 2 to 3 seconds so i know its possible.

Spooledup300z 11-27-05 07:45 PM


Originally Posted by rx7theone
thats how long it takes right now i just know that it should start in 3 secons or less. i have a friend with a first gen and his starts in 2 to 3 seconds so i know its possible.


you made it seem like it took forever to start.... 4-5secs are cool for me, but seems like a pet peeve of urs anyway good luck

DiverseCC 12-26-05 09:36 PM

mines the same way

FCPOOTER 12-28-05 01:58 PM

hey
 
most ems systems give the ignition/fuel system 1,2sec delay to get the engine spinning and get a good signal before actualy firing the injectors/ignition.

jimmyv13 01-17-06 09:40 AM

Most EMS's I've seen, including mine, take about 4-5 sec to fire. It's no big deal, really....

rx7theone 02-06-06 08:16 PM

its all fixed guys thanks.
 
finally i got it to start preatty good now after havin steve kan tune it in pettits shop. it was just a litle tune here and there with the cracking and the water maps.

fastcarfreak 02-07-06 06:27 AM

Im pretty sure this is a common problem on all aftermarket ecus. I would love to have my car start a little quicker. This way it doesnt drain my little odyssey batter so quickly. After a couple years my little battery started getting weaker and weaker, and recently If i didnt get it started on the first try, i had to jump the car (major pain in the ass). Not to say the battery is not good, because it is awesome. Someone made the mistake (not pointing any fingers) of leaving on a powerful charge for like 2 months straight, and the battery sort of inflated and sucked ass afterwards. I got a new one now, and hope i dont have the same problem.
Maybe next time steve tunes my car i'll have him do the same for me.

Adam


All times are GMT -5. The time now is 02:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands