Microtech FD injector shuts off while driving
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2001
Location: Orlando FL
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
FD injector shuts off while driving
Well after sending the Microtech to aussieland for a check up that just wasted my money and half a year, I figured out what my problem was... The pin connection for the wire that connects my dongle/handset directly to the ECU has a short in it. I figured this out today while driving/troubleshooting the wiring. I left the car running and jiggled the injector wiring and then the coils' wiring... nothing. i start driving again and grabbed the handset to check my temps. It started acting up. i jiggled the ecu/dongle and found it.
So if any of you have symptoms like this... now you know.
Symptoms:
loss of power
backfiring loudly
intermittent on/off
A/F gauge goes wayyyyyy lean
My guess is that when the MT people test the ecu they just plug it into a molex connector to a computer, so they never hooked up a handset to it.
So if any of you have symptoms like this... now you know.
Symptoms:
loss of power
backfiring loudly
intermittent on/off
A/F gauge goes wayyyyyy lean
My guess is that when the MT people test the ecu they just plug it into a molex connector to a computer, so they never hooked up a handset to it.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
imitek
3rd Generation Specific (1993-2002)
9
08-28-15 05:28 PM