checklist before starting car
 

Hi all , I think i got my car all wired up and ready to start it after 3 long months of not moving. Is there anything i need to check prior to cranking the engine?

im on Lt8s

-i hook the SX FPR line to the center of the LIM facing the firewall

-map sensor is hooked to the lowest nipple facing the alternator on the UIM

using a 1 oz to 1 gal premix.....

and i have a question wondering if i can T the fpr signal and connect it to my BOV as well?...

thanks a lot

all help appreciated

I'm jealous.. you're moving much quicker than I am. :(

I've heard from several reputable members here that you should not T the source to your BOV. I don't know the impact though... obviously it will start and run, but you may want to avoid getting into too much boost...

Well bovs almost always leak somewhat. So if you are going to then just T it off of something else that aint important. Although i ran a seperate line for mine.

alrighty riley hehe i couldnt get u on AIM....

no more safety checks?