Microtech Area is for discussing Microtech systems

Microtech Any help would be great!

Thread Tools
 
Search this Thread
 
Old Oct 1, 2011 | 01:29 PM
  #1  
ffilemyr's Avatar
Thread Starter
FFilemyr
 
Joined: Mar 2009
Posts: 57
Likes: 0
From: Westminster
MD Any help would be great!

So this is my first time using the microtech i got it from dave @ KDR and he is out sick... so i just need alittle help first off engine info i have a turbo-vert with an S4
750 cc pri and 1000 cc sec. 57 trim turbo areomotive pump ... it took me two days but i got it to idle at first it was dumping fuel into the motor so now im ok to about 2000 and cant go much past that if any one as any maps they could post that would be great

Thanks
Reply
Old Oct 2, 2011 | 09:10 PM
  #2  
ffilemyr's Avatar
Thread Starter
FFilemyr
 
Joined: Mar 2009
Posts: 57
Likes: 0
From: Westminster
So now im good at idle, when i go over 4000 RPM it starts to act up
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post




All times are GMT -5. The time now is 05:27 AM.