VE map for single turbo. Ms2 v3
 

I am curious of anybody is willing to share a v e map for a single turbo Stockport na 13B

I am running.
Ms2 v3
Gsl-se engine with ported S5 intakes. 5/6 port actuators always open.
460 primary 1600 secondary
93 oct
BW s363
Water to air. IAT @ 45F on fresh ice. 100F max (pulls timing after 100F)
Target AFR. 13.7 <100kpa. 12.0 from 101kpa to 150kpa. 11.0 from 151 - 250kpa.
Runnin LS coils COP rx8/fd mode.

My logs and auto-tune suggestions keep adding a lot of fuel up in boost would just like to see what other people have done with a similar setup for comparison purposes

Thanks