Description:

Purchased car as a roller out of TX. Originally a Florida car.  Clean shell with minimal rust. Has been repainted in the past. Paint is rough but decent for a hotrod. Interior is in nice shape. Clean KS title in my name. Built as a weekend warrior drag/drive car. Can get specific pictures and video if interested.

Car is what I’d consider 95% done. Runs, drives well. Could cruise it anywhere.  Has a few bugs to work out. Clutch is touchy, but fully functional. Needs adjusted or a less touchy master cyl installed.  Bit of a ruff ride suspension wise. I’d install lighter springs if I planned a lot of street driving. Will need race fuel or E85. This motor is very high compression. Runs great, pulls hard,  fires right up…


Partial Parts List of the large items. 20k+ total in parts excluding any labor.


 $1000 ecu MS3 (Mega Squirt) plus plug and play with trans control.

$3000 car shell/roller
$1500  Aerospace drag disc brakes in front and wilwood disc brakes in rear.

$2600 grannys 8.8 rear end kit w forged axles. (5 lug)
$300 New adjustable AGX rear struts and springs
$325 new front struts and coil over springs.

$2600 100% NEW from Nissan 6 speed CD009 with 600hp clutch and aftermarket Shifter.
$800 Billet ICT adapter for LS engine
$140 New Wilwood clutch master

$2800 5.3 GEN4 Alum block LS motor, LS heads. Built to 13.3:1 compression (e85 fuel or race gas only)

$2200 ITB intake manifold – LS Individual throttle bodies from Jegs. Sounds amazing!
$480 Mad max cam and spring package. 228/232 .550"/.550" 110+5  

$500 exhaust. Spintech muffler, to a cutout. Then to 2 SLP SS mufflers with an exhaust cutout. Car is relatively quiet with dump closed. Much louder with dump open.
$200 new custom fit floor mats.
$575 Dark star 15” alum wheels
$400 275 drag radials on rear

$250 new front tires.
$350 3” alum driveshaft
$250 Aem400 fuel pump with new lines and filters.
$375 Radiator & E-fan setup. (not ebay garbage) Flex-a-lite Syclone fan. Griffin radiator.  

$100 GPS speedometer.

$new alternator

$new water pump

$New oil pan.

Asking $16,500 as the body/paint is far from perfect and the car needs a little work to be what I’d consider a comfortable streetcar. Couldn’t build this for less. Looking to start a new project.   

  





28* Cold start from a few days ago. Exh dump closed.