Description:

BRAND NEW AND STILL SEALED! NOT KEEPING ROTARY AS INTENDED.
​​​​​​
MICHAEL 828.318.6518

CASH PAYPAL VENMO ZELLE GOOGLEPAY


Includes:

LT-10C

X4

Flying Leads

Booklet



*The LT-10C caters for both the first time user or experienced tuner with it’s easy to use tuning software via laptop or the MicroTech handset , simple & straightforward installation & it’s extremely attractive price


The LT-10C comes standard with 4 injector and 4 ignition outputs and is capable of working with most common engines up to 8 cylinders & 2 rotors. The LT-10C will support most factory ignition systems such as multi coil and distributor as well as aftermarket ignition systems such as CDI or MSD. However, the LT-10C is most commonly used with the MicroTech X4 igniter box providing an extremely high output direct fire ignition system at a very reasonable price


A new feature for the LT-10C ECU is the addition of a CAN output which will allow the MicroTech ECU to connect directly to most common aftermarket dash loggers such as Racepak, PCS or MoTec. The MicroTech transmits data via the CAN bus at 1 Mbit/second.


The LT-10C is capable of controlling sequential injection on 4 cylinder engines as well as 2 rotor Mazda rotary engines and direct fire ignition for engines up to 4 cylinders or 2 rotors, or wasted spark ignition on engines up to 8 cylinders


Each LT-10C comes factory preset to suit your particular engine combination & sensors & has a base map already installed to allow the end user to turn the key & start the engine once the installation is complete. The factory installed base map has all the basic parameters set & basic fuel & ignition tables loaded to give the tuner a headstart & great starting point to work with cutting down on expensive dyno time


Like all MicroTech ECu’s the LT-10C kit comes complete with a fully labelled unterminated wiring loom, instruction manual & wiring diagram to make the installation as simple & easy as possible



*The MicroTech X4 and X6 igniter boxes are designed to be used in direct fire ignition applications. The X4 box has 4 igniter output channels, and the X6 box has 6 igniter output channels.


Available as an option when ordering the Microtech ECU, the X4 and X6 ignition boxes plug directly into the LT-10c and LT-16c respectively. Running the igniters in the separate boxes, as opposed to having them fitted inside the ECU, causes less heat to be generated allowing us to introduce our “IGBT” ignition boost function, which is available on LT-10c and LT-16c ECU’s, as a standard feature.


For 8 cylinder applications, 2x X4 Igniter boxes are run with the LT-16c


Both the X4 and X6 igniter boxes are compatible with all other brands of aftermarket ECU’s, making them an extremely cost effective ignition module option.