91t2 vs s2000
it was a wed night we usually go out to this spot in Long island (NY) at this wendys and we chill . while we were out there i ran into some of my friends from my area , a nice lil team of honda's a built rsx type s an s2000 and a few bubbel back civics . either way i get a call theres a money run goin down in queens so we get on the highway to head back to queens and the s2000 pulls up and wants to run so im like what the hell i got a lil gas to burn so we go from a second gear roll punch it and he literally got left by like 3-4 cars so he comes back and is like he's not getin traction lets run it again so we do it again with the same result . he was so embarassed he went home and parked up his nice real over priced honda and got in his boy's rsx . my mod's are rebuilt t2 no porting . microtech lt8s garret t70 , walbro 255lph , aeromotive fpr . fmic , greddy type rs blow off and runin and a street tune .
|
Good Kill, what was done to the s2k?
|
Originally Posted by efranklin
(Post 7513080)
Good Kill, what was done to the s2k?
|
good kill
|
nice kill
|
good kill:icon_tup:
|
Good kill
|
good kill!
|
Nice job. Granted, those cars aren't the fastest, but they take well to mods and are pretty. quick out of the box.
|
T70, i hope you kill him by alot. thats over kill for a non force inducted car
|
yeah, any FC with a T70 shouldn't be going around picking on naturally aspirated hondas...
|
Originally Posted by 1RevvinFC3S
(Post 7516625)
but they take well to mods .
|
Originally Posted by F.T.P. rotaryrocket
(Post 7517023)
not really
This one was a pricey build, but its also a show car with lots of overkill in certain areas... http://videos.streetfire.net/video/d...c4010f4329.htm This vid is of a turbo'd S2000 (that you can't hear due to a Peripheral Ported rotary :D:D:D ) http://videos.streetfire.net/video/6...b501342fe5.htm http://videos.streetfire.net/video/6...98014ba596.htm http://videos.streetfire.net/video/5...2d011d884e.htm Do I really need to go on? |
Originally Posted by 1RevvinFC3S
(Post 7517864)
Yah, really.
This one was a pricey build, but its also a show car with lots of overkill in certain areas... http://videos.streetfire.net/video/d...c4010f4329.htm This vid is of a turbo'd S2000 (that you can't hear due to a Peripheral Ported rotary :D:D:D ) http://videos.streetfire.net/video/6...b501342fe5.htm http://videos.streetfire.net/video/6...98014ba596.htm http://videos.streetfire.net/video/5...2d011d884e.htm Do I really need to go on? |
Okay, you can take what I was originally saying out of context if you'd like, but I wasn't really referring to basic boltons. Granted, the S2000 in question DID have basic bolt ons, I was just stating that they do take well to REAL mods (forgot to elaborate, sorry). Last time I checked, nobody really brags too much about intakes or exhausts because they know that they aren't gaining a whole lot of power. But from a general standpoint, its obvious when you slap an S/C or turbo onto one of these that you're going to see over 350hp at the wheels. Thats a fact. And sure, it may cost $7,000 +, but it will result in a badass reliable (well, as reliable as an S2000 is) lightweight, well handling car. And yeah, dump 7k into a TII or FD- you'll have a badass 7. HOWEVER, dump $7,000 into an N/A FC and you won't really have a whole hell of alot to show for (engine swaps aside).
|
Originally Posted by 1RevvinFC3S
(Post 7518733)
Okay, you can take what I was originally saying out of context if you'd like, but I wasn't really referring to basic boltons. Granted, the S2000 in question DID have basic bolt ons, I was just stating that they do take well to REAL mods (forgot to elaborate, sorry). Last time I checked, nobody really brags too much about intakes or exhausts because they know that they aren't gaining a whole lot of power. But from a general standpoint, its obvious when you slap an S/C or turbo onto one of these that you're going to see over 350hp at the wheels. Thats a fact. And sure, it may cost $7,000 +, but it will result in a badass reliable (well, as reliable as an S2000 is) lightweight, well handling car. And yeah, dump 7k into a TII or FD- you'll have a badass 7. HOWEVER, dump $7,000 into an N/A FC and you won't really have a whole hell of alot to show for (engine swaps aside).
|
^Absolutely. I mean, Honda pulled a miracle out of their asses by making a 2.0L (F20) with 240hp N/A. And that engine is pretty strung out in a sense (has to rev to 9k to really show anything). Plus, I'm sure the F20/F22's are strong motors from the factory, so it wouldn't be very economical/cost efficient for an owner to tear it down and rebuild it as a badass N/A motor, so the obvious step to take in making a badass S2000 is FI.
|
thanks guys . the kid wants to race again before i put the car up for the winter , so when i do race him again ill bring the camcorder along
|
^Please do. I'd like to see it.
|
Originally Posted by 1RevvinFC3S
(Post 7520327)
^Absolutely. I mean, Honda pulled a miracle out of their asses by making a 2.0L (F20) with 240hp N/A. And that engine is pretty strung out in a sense (has to rev to 9k to really show anything). Plus, I'm sure the F20/F22's are strong motors from the factory, so it wouldn't be very economical/cost efficient for an owner to tear it down and rebuild it as a badass N/A motor, so the obvious step to take in making a badass S2000 is FI.
|
Originally Posted by trinimazdax
(Post 7533991)
thanks guys . the kid wants to race again before i put the car up for the winter , so when i do race him again ill bring the camcorder along
|
Nice kill Trini.......feel like running my GTUs on the Jackie Robinson? =P
|
Originally Posted by Roen
(Post 7554370)
Nice kill Trini.......feel like running my GTUs on the Jackie Robinson? =P
|
lol, remember, this ain't no straight road either.
|
^^ :rlaugh: sounds like my kinda guy
|
All times are GMT -5. The time now is 02:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands