Im looking for project car. The reason why im here is find out difference between a 1992 JDM and a 1993 North American. Other then the steering wheel.
I know that the 92 wasn't made here only in Japan.
If I did get the 92 JDM would the parts from a 93 fit (ex. body kits, engine, fuel management system....)

Any help would be most appreciated.

Thanks

 

Good question

 

Everything is pretty much the same other then the obvious, most differences are in the interior, other then that everything is the same only reversed from a LHD car...some are interchangeable and some are not.
Both cars were made in Japan and the RHD car will always be alot cheaper, most all aftermarket parts will fit both.
To the OP: There is a meet in the Toronto area in May, you should drop by.
https://www.rx7club.com/canadian-forum-42/spring-meet-may-17th-2pm-sherway-gardens-830699/

 

Here is a link. All items I found for the 92 say 1985-1992. And all the 93 models that I wanted say 93-95. But I thought that I can use the 92JDM parts with a 93 N. American car.
Here is 93-95 HERE
And the 1985 - 1992 HERE

So There is no difference between the 92 JDM and a 93LHD???

 

Maybe I will. Sounds like fun!!

 

The JDM model doesn't have a pre cat.

 

Well, I own a JDM FD, and pretty much everything (almost) is the same

*The down pipe in JDM is curved another way, so a LHD downpipe cant fit into a RHD.
*There are seats in the back of JDM, storage bins for LHD
*The windshield wiper switch is on the left side, and turn signals on the right side (opposite of LHD)
But everything in the engine should be the same.