Female racer/drifter :D
Hi! I'm Brandella and I LOVE Mazdas and racing/drifting! I bought a fc from my friend to build for race car, I ended up wanting to turn it into a drift car as of now. I already pulled the [carbon locked] na engine, tranny, drive shaft, [totally rusted] exhaust, gutted the interior, and I'm about to pull the diff to weld it. I wanted to put a rew in it but I kept reading that it was a huge pain to put it into a s4 chassis /= Then decided on a s5 t2 :D I just need to find an engine now. I'll post pictures later, I've been more concentrated on the build than documenting it right now =P
|
welcome. i think its awesome to see girls that r into the car scene, so hows knoxville? i used to spend alot of time in gatlinburg tn.
|
nice to have another lady interested in racing!
|
Welcome definitely nice to see another female on here....
|
Welcome! Post up some pictures when you'll have time :)
|
welcome cant wait to see the pics i just picked up a t2 also
|
Thanks guys (: Knoxville is a pretty awesome area, the drift scene is pretty small but we are working on it to make it grow!
|
I've met quite a few car people up near Knoxville, definitely seem like nice people. Post some build pics!
|
Wow girl drifter? Sweet!
|
I was thinking the same thing
|
welcome to the club
|
Girl drifter? Rad.
|
welcome... im trying to get my wife into drifting too :)
|
What side of TN are you located on? I just picked up a 12a FB to start restoring, and I'm getting ready to pull the short block (1st time in a long while & 1st by myself). It would be awesome to get some subject matter expert help from time to time.
|
im doing the same i have a 86 fc and currently building it in to a drift car but keeping it na turbo to much hassle for me
|
its awesome to see more girls getting into drifting/racing, my whole family has been behind the wheel since we could see over them. im the younget of 3 with 2 sisters.
|
nice to see girls behind the wheel of nice car
|
Chick drifting...thats hot LOL
|
13b-RE swap FTW! :) do it!
|
Welcome. Good to see another drifter from knoxville. Thats Where im from. I love it there. wish i hadnt left but oh well. post some pics of the fc.
|
welcome, you gotta post some pics of your build!
|
Nice cant wait yo see some pics
|
Welcome
|
Thanks for the support guys!!
To answer some questions, I am located in West Knoxville. I am one of the main coordinators of east10drift and the only female (As far as I know) in the whole east tn drifting scene. Here's the story on my 7: I bought a '87 FC from my friend, who said the engine was carbon locked, but I put little to no effort into making it turn because I had bigger plans for it (: I pulled the engine, trans, dshaft, diff, subframe, hubs, suspension, etc lol It was literally a shell on four jack stands. Gutted the entire interior too. I drove over 6 hours east to buy a t2 motor, trans and dshaft. Later then drove 2 hours south to buy a t2 lsd, 5 lug and t2 brakes. In the span of about 3 days me (and a few amazing friends) put the engine, trans, dshaft, lsd, 5 lug, brakes, suspension, wheels, mazdaspeed seats in. I was attempting to get her ready for the drift event we had Saturday, but a fuel problem got in the way and she had to sit this event out. ): I have ordered some injector connectors and hoses, so I hope she'll be up and running soon! Sorry for the delay on the reply guys, I've been crazy busy with this build! Rotaryyyyy Pooowwweerrr soon! |
Good to hear. Wish I had the time and availability to devote even 3 whole hours to pulling and purchasing for my FB.
|
omg a girl lol ive never seen one before
|
thats awesome need to find a lady like you
|
welcome!!!
|
welcome and post up some pictures of you with the car...js
|
Good luck with build!!! pics soon I hope?
|
let's see some pics of the project!
do you know a guy name Casey in knoxville, TN? He has and used to have a bunch of s14 240sx's and he's really in the drift scene |
Welcome to the forum. I'm Ron. Always great to hear females are into the drift scene as much as guys and pulling garage time to mod their own cars.
I'm new to the forum as well. |
woman drifter ftw
|
I should Abuse my Moderator status and Demand Pics of you and your car..but I won't do that............................today...cough...lo l!
Welcome to the forum! I am gonna go where no other guy on here has ever gone!..you got any Single FRIENDS?.!!! |
Always good to have females in the tuner scene
|
You have two local rotary shops within a hour of you. Rotaryresurrection.com and addictedperformanceunltd.com
I don't take customer work anymore but those two shops could help you with any engine needs. |
Is the engine you put in it a S4 or S5T2? Swapping a S5T2 engine into a S4 car seems to be a pain in the butt because of the stock N370 ECU's pinout being different from the N330/N333 (electronic OMP, no quick-spool actuator and a couple other things). FWIW, the S5's OMP is VERY expensive to replace with a brand new one if it fails (and puts the car into Limp Mode as a result).
If this happens to your car, my advice would be to put the ~$1500 in a Haltech or other suitable EMS and possibly convert to premixing. IMO, the S4 chassis is much easier to give a standalone than the S5 because they changed quite a few things in the S5's wiring diagram. I'm not too familiar with the S5, but checking the https://www.rx7club.com/2nd-generati...faq-fc-494667/ and downloading the wiring diagrams would answer any questions that would come up. My 20B-REW S4 was surprisingly easy to retrofit with a Haltech PS2000 standalone EMS as everything that the Haltech would control was originally in the Emission Harness that came out with the old engine. The only thing that wasn't there was the wire for the Coolant Gauge Sender (rear iron, driver's side), but it wasn't too hard to integrate. With my swap, the original alternator wiring went with the old engine but it wasn't an issue since I'm using a 130A Taurus Alternator. If you haven't already done this, the first modification you should do once the car is running is a FD Alternator. It is entirely bolt-on & plug&play in a S5, only needing a pulley such as #11480 from MAZDATRIX for Mazda RX7, RX8, Rotary Engine Parts and Accessories. This was the first modification I ever did and it made a world of difference. |
djseven- thanks for the shops really helped me out
|
there is a company in Tennessee that sells rx7 parts and does alot of work. it is rotary resurrection. is this the company that you are using to get all of your parts?
|
Have you started a build thread?
|
Welcome to the club. I haven't drifted in TN in years. I was stationed at Ft. Campbell,Ky for a while and we would just find parking lots to tear up.
|
Oh my! I'm surprised by the response of this thread.. I finally have a few pictures of my fc but she's not finished.. yet :D
When I first picked her up http://i45.tinypic.com/2w7l8pf.jpg http://i48.tinypic.com/24mwdqp.jpg http://i48.tinypic.com/se93fa.jpg http://i46.tinypic.com/bhaf84.jpg http://i50.tinypic.com/30mx476.jpg http://i47.tinypic.com/2qkkoaq.jpg Andddd..... here's me :3 http://i47.tinypic.com/u8q3b.jpg http://i47.tinypic.com/qpse44.jpg http://i48.tinypic.com/4lt9cp.jpg http://i45.tinypic.com/eahx08.jpg http://i45.tinypic.com/20ssk60.jpg Yes, that is a rotary tattoo and a rotor and rotor housing in my bedroom :3 |
Originally Posted by Akagis_white_comet
(Post 11234624)
Is the engine you put in it a S4 or S5T2? Swapping a S5T2 engine into a S4 car seems to be a pain in the butt because of the stock N370 ECU's pinout being different from the N330/N333 (electronic OMP, no quick-spool actuator and a couple other things). FWIW, the S5's OMP is VERY expensive to replace with a brand new one if it fails (and puts the car into Limp Mode as a result).
If this happens to your car, my advice would be to put the ~$1500 in a Haltech or other suitable EMS and possibly convert to premixing. IMO, the S4 chassis is much easier to give a standalone than the S5 because they changed quite a few things in the S5's wiring diagram. I'm not too familiar with the S5, but checking the https://www.rx7club.com/2nd-generati...faq-fc-494667/ and downloading the wiring diagrams would answer any questions that would come up. My 20B-REW S4 was surprisingly easy to retrofit with a Haltech PS2000 standalone EMS as everything that the Haltech would control was originally in the Emission Harness that came out with the old engine. The only thing that wasn't there was the wire for the Coolant Gauge Sender (rear iron, driver's side), but it wasn't too hard to integrate. With my swap, the original alternator wiring went with the old engine but it wasn't an issue since I'm using a 130A Taurus Alternator. If you haven't already done this, the first modification you should do once the car is running is a FD Alternator. It is entirely bolt-on & plug&play in a S5, only needing a pulley such as #11480 from MAZDATRIX for Mazda RX7, RX8, Rotary Engine Parts and Accessories. This was the first modification I ever did and it made a world of difference. I want to build my own 20b, any suggestions or helper threads?
Originally Posted by djseven
(Post 11234590)
You have two local rotary shops within a hour of you. Rotaryresurrection.com and addictedperformanceunltd.com
I don't take customer work anymore but those two shops could help you with any engine needs. The other one, I haven't heard of, but I shall check it out (: Thank you!! |
Drifting my friend's s13
http://i48.tinypic.com/2mq0z8n.jpg Autox'ing the Speed3 http://i49.tinypic.com/9bgdb4.jpg |
Welcome from me too of course^^
|
Welcome to the forum really nice to see a girl who is into drifting :D
|
Love drifting and women! Awesome thread! lol
|
Welcome. My gf is jealous of you. Lol
|
Wowowow all of you stop to act like latinlover XD
Damn is really this rare to see a nice girl with a nice car??? |
Originally Posted by Mazda.doll
(Post 11239538)
I made sure I went with a s4 t2 to make it easier on me lol
I want to build my own 20b, any suggestions or helper threads? I have heard of Rotary Resurrection, it's about a hour away from me and I've been up there a few times for a few things (: He is a great guy. The other one, I haven't heard of, but I shall check it out (: Thank you!! There are a few people who offer 20B engines here, but you REALLY need to be careful who you deal with. One well-known forum vendor recently scammed two members out of $2200 and $2100 each on engines for their FDs. Details are in the Feedback Section. Two shops I can recommend getting a 20B from are Banzai Racing (Banzai Racing Home Page) and Defined Autoworks (GTORX7. is their username here). For parts such as gaskets, I generally go through Atkins Rotary (Atkins Rotary - Rx7 | Rx8 | Mazda | Rotary | Engine | Parts). Kevin Landers (Rotary Resurrection) is another great source for parts that I've had consistently good results with (including pulling a couple ebay auctions for me, major props there), although he doesn't stock 20B parts that I am aware of. |
All times are GMT -5. The time now is 03:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands