RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Introduce yourself (https://www.rx7club.com/introduce-yourself-254/)
-   -   Female racer/drifter :D (https://www.rx7club.com/introduce-yourself-254/female-racer-drifter-d-995981/)

Mazda.doll 04-23-12 02:20 PM

Female racer/drifter :D
 
Hi! I'm Brandella and I LOVE Mazdas and racing/drifting! I bought a fc from my friend to build for race car, I ended up wanting to turn it into a drift car as of now. I already pulled the [carbon locked] na engine, tranny, drive shaft, [totally rusted] exhaust, gutted the interior, and I'm about to pull the diff to weld it. I wanted to put a rew in it but I kept reading that it was a huge pain to put it into a s4 chassis /= Then decided on a s5 t2 :D I just need to find an engine now. I'll post pictures later, I've been more concentrated on the build than documenting it right now =P

fc3rotard 04-24-12 08:26 AM

welcome. i think its awesome to see girls that r into the car scene, so hows knoxville? i used to spend alot of time in gatlinburg tn.

BS13 04-24-12 10:30 AM

nice to have another lady interested in racing!

24kryda 04-24-12 10:46 AM

Welcome definitely nice to see another female on here....

invert 04-24-12 11:22 AM

Welcome! Post up some pictures when you'll have time :)

jamesahokas 04-24-12 02:50 PM

welcome cant wait to see the pics i just picked up a t2 also

Mazda.doll 05-05-12 06:16 PM

Thanks guys (: Knoxville is a pretty awesome area, the drift scene is pretty small but we are working on it to make it grow!

bixs 05-10-12 12:06 PM

I've met quite a few car people up near Knoxville, definitely seem like nice people. Post some build pics!

cshirey1991 05-10-12 12:30 PM

Wow girl drifter? Sweet!

cshirey1991 05-10-12 12:54 PM

I was thinking the same thing

evot23 05-11-12 05:56 AM

welcome to the club

surx7 05-11-12 04:23 PM

Girl drifter? Rad.

Kingcof22 05-11-12 07:23 PM

welcome... im trying to get my wife into drifting too :)

8064r7 05-11-12 08:38 PM

What side of TN are you located on? I just picked up a 12a FB to start restoring, and I'm getting ready to pull the short block (1st time in a long while & 1st by myself). It would be awesome to get some subject matter expert help from time to time.

dodgeram1500 05-14-12 03:21 PM

im doing the same i have a 86 fc and currently building it in to a drift car but keeping it na turbo to much hassle for me

2jz93fd 05-14-12 08:01 PM

its awesome to see more girls getting into drifting/racing, my whole family has been behind the wheel since we could see over them. im the younget of 3 with 2 sisters.

openHeader 05-15-12 12:36 PM

nice to see girls behind the wheel of nice car

cretonrx7 05-17-12 11:03 AM

Chick drifting...thats hot LOL

CowboyTayy 05-17-12 12:35 PM

13b-RE swap FTW! :) do it!

2fc 05-20-12 03:15 PM

Welcome. Good to see another drifter from knoxville. Thats Where im from. I love it there. wish i hadnt left but oh well. post some pics of the fc.

dylan721 05-20-12 03:29 PM

welcome, you gotta post some pics of your build!

sevenlives 05-21-12 05:03 PM

Nice cant wait yo see some pics

Mark94rx7 05-22-12 12:27 AM

Welcome

Mazda.doll 05-22-12 02:52 PM

Thanks for the support guys!!
To answer some questions, I am located in West Knoxville.
I am one of the main coordinators of east10drift and the only female (As far as I know) in the whole east tn drifting scene.

Here's the story on my 7:
I bought a '87 FC from my friend, who said the engine was carbon locked, but I put little to no effort into making it turn because I had bigger plans for it (:
I pulled the engine, trans, dshaft, diff, subframe, hubs, suspension, etc lol It was literally a shell on four jack stands. Gutted the entire interior too.
I drove over 6 hours east to buy a t2 motor, trans and dshaft.
Later then drove 2 hours south to buy a t2 lsd, 5 lug and t2 brakes.
In the span of about 3 days me (and a few amazing friends) put the engine, trans, dshaft, lsd, 5 lug, brakes, suspension, wheels, mazdaspeed seats in.
I was attempting to get her ready for the drift event we had Saturday, but a fuel problem got in the way and she had to sit this event out. ): I have ordered some injector connectors and hoses, so I hope she'll be up and running soon!

Sorry for the delay on the reply guys, I've been crazy busy with this build!
Rotaryyyyy Pooowwweerrr soon!

8064r7 05-23-12 10:45 AM

Good to hear. Wish I had the time and availability to devote even 3 whole hours to pulling and purchasing for my FB.


All times are GMT -5. The time now is 10:47 PM.


© 2024 MH Sub I, LLC dba Internet Brands