Sweet install. I always like to see a project come along like that when someone takes their time and does it right.

Great job man. Props

how did you cover or fold the carpet around the "rx7" and the "rotor"

Ok, the secret to the 7 and rotor design. All I did was cut out the designs from 1/2" mdf for the rotor (because I wanted it to stand out more) and 1/4" masonite for the rx 7 one. I used 3M 77 spray adhesive on both the carpet and surface. When you use carpet, please use and unbacked carpet as it is much easier to stretch. I start at one side of the design and work over pushing the carpet up against it and making sure its tight (large flat head screw driver). All you do from there is to work aroundthe project slowly streatching and tucking as you go. It just time (around 15 inutes for the RX 7 logo).
http://www.partsexpress.com/images/260-764m.jpg
http://www.partsexpress.com/pe/showd...number=260-765