Hood pins on Stock FD hood.
 

Can I please see some pics of the Hood pins on the FD's. I would prefer stock, and montego blue, but all others are fine. Thanks guys.

Amel

thats dumb. no funtion. would look like crap. i hope i dont have to see pics.

Forum is giving me hard time posting pics. Anyway, if anyone is good with photoshop, here is pic of my fd.

interesting hood......how do you keep water out?

uh..im gona agree with inis..you know why they use hood pins right...so..with a stock hood..hood pins would be uslesssssssssssssssssssssssssssssssssss uuggg doesnt make sense man.

i hate them because im not really into the look. i didnt want to do them on my hood but i had to protect the investment.

So you agree that bodykits are pointless too then right? ;)

Hood pins look trashy. Add some duct tape while you're at it.

im sorry but you are very wrong! the stock hood does sometimes flutter up and down. hood pins do lock them down.

Someone backed into my car with an SUV, denting my hood. The next time I closed the hood the rivots holding the latch to the hood failed. However, it still did not open because the latch mounting plate is sandwiched between the skin and frame of the hood and the plate is larger than opening in the hood frame for the latch itself. Therefore even if the rivots attaching the latch to the hood fail it will not fly open. The only way the hood will spring open is if the steel latch fails BEFORE the rivots holding it to the frame fail. It is possible, but there are other things to worry about that are more probable and dont make the car look like a highschool student's wet dream.

if i were to get a cf hood i would put hood pins in.....but i wouldnt use pins i'd use small locks

Yes the locks look significantly better than pins, especially since pins rust due to the friction, and locks don't or do, but not where you can see it...

-DC

has anybody got any pics of a hood with locks on and a website with a link to where i can get them, not sure if i've ever seen them on an FD?

Ryan

Well, my hood, as you can see is a little modified. Without rain gourds, just like that on the picture now, the hood doesn't move anywhere past 120mph. However when i put my rain gourds in, for some reason as soon as i go 120-130, it starts to move, like it will open or something.

I'm affraid that it might wrap itself around my winshield, and then i can kiss my ass goodbye.

So for all of you that think it looks ugly or not, Frankly, i don't care, because i need to do somethign about it.

I still haven't seen any pics. So, someone please post some.

Amel

because most likely with guards off theres suffcient space for the air going in the front to escape, with guards on the air will be smacking against the underneath of the bonnet making it lift.

rxrotary2_7 (keith) has small locks....thats where i saw them...i dont think he has pics though

Um no, you're wrong, and obviously a retard. The stock hood in engineered perfectly. Through its design and strong latch, there is absolutely no worry about it randomly flipping up. Unlike many of the poorly constructed aftermarket hoods.

Ya, it rattles a little, but we all know that hood pins will do nothing. Unless you really think the rattling somehow affects the car. In that case, you are even dumber than i originally thought.

I don't see anything wrong with hood pins.
Have any of you ever seen how much the stock hood flutters above 140 mph???
It's kind of scary if you ask me, it almost looks like it isn't latched at all.
I've thought about hood pins for the stock hood for this very reason, but will probably refrain from using them until I go with a vented after market hood.

YES!!
 

Honestly!!

I feel hood pins or locks are good.
And The stock hood does flutter and shake at high speeds..Everyone wonder why??Well at high speeds,the air traveling through the front vents
cant find a place to escape.Pressure pushing the hood up..Well Hood pins Will help Hold the front of your hood down better,keeping it a little more stable or attached ..also the front is held down by only the lock so only 1 point vs. 2 hinges in the back of the hood.but the Rear of my 89 TURBO II i had before would really Flutter and rise above the body..!!over 130 mph..the hood scoop creates alot of drag and also the pressure is being built up under the hood..!!
But what do we do about this pressure that still exists under the hood??Well venting it or Lifting the hood Can let air escape, thus in my theroy, allowing more air to pass into and through the engine bay allowing more cooling..Here is a link of my mod on this post..Oh and hood locks Will protect your investment But why wouldnt they steal your car first before they take anything underneath??any lock can be broken so i would rather have hood pins with clips=)(just cause it looks faster!!LOL)
https://www.rx7club.com/showthread.p...hreadid=257936 or here is a pic of what i did to my GTUs =) (some hate it some love it..
http://www.drifting.com/forums/attac...=&postid=19036
http://www.drifting.com/forums/attac...=&postid=19034

is anybody actually going to post any pictures of FD with hood pins, or is this thread just waste of bandwith and space?

By the way, very nice FC man. I like how clean it looks.

Yo- not to hijack, but I'm liking Jun's front end- way sanitary. Is it custom? Looks like removed and smoothed FTP's and an extra hole cut into the center of an S5 nose. Me likes.

Probably not. Most people here just like to flame and argue nowdays.. I say go for it. You're doing it to serve a purpose. SAFETY. Sounds like a smart fucking plan to me. Just like a fire extinguisher... Wonder how many people here thought having one was "RICE" or "POINTLESS" until thier poor FD burned to the ground..

I'm sure we can find some pics somewhere.. Or we can photoshop some..

But for now, I'm off to find the LOUDEST exhaust and SWEETEST blow off valve I can find! Maybe even some hydraulics!! YEE FUCKIN HAW!!

:rlaugh: man you crack me up every time i read one of your posts :rlaugh: How come you are not this funny when we work on the engine :D

Anyway, i'll start shoping for some nice looking hood pins that don't rust, so maybe we can put them together :)

Amel

I have to dig through some old posts / pictures.. but it's basically a big silver disk 3" across (diameter) and a oversized computer (cylinder lock( in the middle...