Heel Toe Pedal Cover/Replacement?
 

Anyone know of a good Cover or replacement for the accelerator pedal to achieve some good heel toeing? The standard setup in the FD is a bear, if you know what I mean. I'm thinking the brake and clutch pedals are fine but widening the accelerator would probably do it.

Thanks.

David

Crooked Willow used to sell a "widefoot" pedal, but I guess they don't anymore.

Check Sled Driver's Posts,
Such as this one:
https://www.rx7club.com/forum/showth...hreadid=112102

He even gives you the drill bit fot the mounting holes - I have the full set of his pedals on my fd

MaxPesce:

Thanks so much for that thread.........based on the feedback from everyone it seems as though it's just what I was looking for and worth the $50.

I owe you a :beer:

Thanks again.

David

I am well satisfied with mine - I orig ordered his widest accel pedal but found it to be too wide for my extra wide foot so I cut abt 1/2" (1 row of holes) off the left side.:cool:

PM WidefootRacing. The Widefoot pedal adapters are designed to make heel and toe easy, and they work great. I have the small one and I think it should work for anyone.

-Max

Thanks, MaxCooper..........

I'll do it as well. Was just waiting for some $$ to transfer into PayPal and send off some money to SledDriver............I'll give Widefoot a PM and check it out first............

David

Thanks, MaxCooper..........

I'll do it as well. Was just waiting for some $$ to transfer into PayPal and send off some money to SledDriver............I'll give Widefoot a PM and check it out first............

David

I'm with Max. Have had a Widefoot (small) for years and love it. It mounts on the side of your gas pedal, so does not add any thickness, just width. Comes in small and large sizes. Does not require any drilling of your stock pedal or lever to mount.

Watch out if you let someone else drive your car though-- you'll both have some pucker to deal with if they're going for the brake and hit the gas instead :)

I've got SledDriver's dead pedal cover too. Nice piece, but I haven't got around to installing it. Goes well with the stock pedals.

Thanks ArtofWar...........

Am waiting for a reply from Widefoot now...........will check it out and decide..........

Out of curiosity, how the heck does it mount to the side of the pedal.........glue, screwed to the back or what?

Tks,

David

Ehhh, it's easier to see than explain-- the pedal part extends to the left of the gas pedal and is level with it. On the botton of the pedal part has a bracket that grabs both the pedal extender, and the lever that goes down to the gas pedal. You drill no holes in the stock gas pedal lever or gas pedal. No glue or tie wraps either. Just a couple (few?) machine screws between the pedal extender and the bracket (use locktite). You can go to Steve Ciriani's site and look up my review from the time that I installed it.

I have a set of BBK pedals in my ITS car. Got them from Summit for like $30 or so. Simple and effective.

Chris

Thanks guys

Just got in the pedal covers from Sled Driver........looked great and it took a whopping 30 minutes only to install both.

For the love of all that is holy, I can heel-toe, I can heel toe I SAY!!!!!!!!!!!!! ;)

Great product, great service, EASY freakin install!

You're the bomb, Sled Driver..........

David

Thanks for the thumbs up.

This is what David purchased.

https://www.rx7club.com/forum/attach...&postid=764720

Here is a link with more info


https://www.rx7club.com/forum/showth...hreadid=112102

Always the salesman........

What about this pedal? I found it on ebay a little back... wish I would have picked it up, its the first pedal I have seen to look 95% stock.

https://www.rx7club.com/forum/attach...postid=1170027

Looks can be deceiving
 

Did you notice that there is no way to attach this pedal cover, other than by the "recommended" GLUE method???

What kind of glue is really going to stick "permanently" to the stock plastic pedal????

Shady:cool:

do u guys know where to get the actual mazda one? the one that has the RX-7 insignia on it? I heard that they discontinued it, but I was wondering if any places still carried it. I was also reading that it doesnt fit or something.

Check out Corksport at...


http://www.corksport.com/main.php3?p...3Fcat%3D214923

$55, if it's in stock.

Looks like this.....

.https://www.rx7club.com/forum/attach...&postid=334306

thx. I like that look... I have big feet, so that wide pedal may not be best for braking purposes, however, I cant manage to do heel toe because of my thigh room anyhow, so once I get a smaller wheel and maybe some seats that sit lower, Ill try. I dont have a tilt steering wheel so its limited at best. thx for the link and pic again. :)

Std size....

Also available


https://www.rx7club.com/forum/attach...&postid=521756

Stevey629:

Personally I think SledDrivers look better than the one pictured with the RX7 on it, because the holes make it look a lot closer to stock than that other one pictured above. It may say RX7, but beyond that it doesn't match at all.

Also, Sled charges $50.00 for TWO pedals delivered; the accelerator and a matching dead pedal which make that whole area of the cockpit look pretty spiffy, versus ONE pedal for $55 probably plus freight.

Even though the insignia RX7 shows up on a flash photo, I doubt you can even read it in real life down under the dash.

Oh well, just my $.02.

David

Pssssssst..........Sled, when Stevey orders yours now send me that $5 on paypal................wink wink nudge nudge...............J/K............

You got it buddy. A deals a deal:p:

And dont forget there will be an FC set for sale too!! Just tryin to do my part to help out us less fortunate fc guys:).

UpDate
 

FC Gas & Dead pedal are done, working on the brake & clutch. There is light at the end of the tunnel :D

Stay tuned........