flat sheets of carbon fiber?????
anybody know where i can get flat sheets of 1/4 in thick carbon fiber to make interior door panels out of? would need to be about 2' x 3' or something.. if i find some i'll measure... how much do y'all think that would cost?
thanx |
Do you want raw carbon fiber (which is flexible, but requires you to put resin on it) OR do you want finished flat sheets of carbon fiber (which are basically flat panels of carbon fiber)?
For raw carbon fiber: www.carb.com www.uscomposites.com |
|
thanx for the links guys
what im actually looking for is already made panels of CF, but if i cant get them or theyre way too expensive i might try to make them myself... |
I can make you a flat panel out of carbon. i just need to know how thick, and the dimensions. Also if you want it clear coated or not.
www.carbonfiberpart.net |
what im looking for is 1/8 to 1/4 in thick doesnt really matter its for door panels... foam core is good. dimensions are about 18 by 30 in or something i still havent measured. i dont really need it to be clear coated as i can do it myself if i feel the need. just to get an idea what would 1\8 x 18x 30 cost?
|
It really will depend on how strong you want the pieces. You have 3 options for making the 2 panels
1) I could use 2 layers of 12K carbon fiber. That would take 2 yards at 52 a yard. Plus 50 dollars for my time, resin, etc. Looking at 154 plus shipping. It would be pretty thin 1/16-1/8 and fairly strong. 2) I could use 2 sheets of 1/8 foam core. (70 dollars) and thinner 3k carbon on both sides of the foam. Here again it would take 2 yards at 47 a yard. Plus 50 dollars for my time, resin, etc. Looking at 214 plus shipping. It would be pretty thin 1/8+ and stronger than the solid carbon. 3) If the backside of the panel won't be seen you may be able to get away with on layer of 12k carbon reinforced with a layer of chopped fiberglass. That would take 1 yard at 52 a yard. Plus 60 dollars for my time, resin, etc. Looking at 114 plus shipping. It would be pretty thin 1/16-1/8 and fairly strong. |
well thats about what i figured... and a little too high for me right now. i need to paint my car but if i have some extra cash after that i'll drop a line
|
All times are GMT -5. The time now is 12:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands