No tach after installing e6k, car runs good but no tach! help please.

 

If you are using stock ignition components, make sure the yellow/blue wire form the trailing coil pack is connected to the tach. And this has been covered to death.

 

I tied 2b y/b to 1h lt grn. still no tach! I guess i better start tracking down the wiring and check connections. The car started right up after wiring all new wire for the haltech. If any other ideas please say. Thanks Claudio!!! PS hope you have some luck moving to the states.

 

Got it going tied 2/b to ing. out and it works fine. Thanks!