injectors?
 

i just picked up an e6k and now i am going to order some bigger injectors to go with my turbo setup. so does it matter if i use high imp or low imp injectors? i was looking at running 4 1000cc or 1600cc top feed rc injectors

Stay away from RC injectors. And no, it does not matter if they are high or low imp., the K can handle them. I would go with 4x1000, plenty of power potential there.

really whats wrong with rc injectors cause i know a few people that use them and they seem to work really good. what kind do you recommend then?

Figure 4x550's (2200cc/min at 40psi base) will support about 260rwhp before the injectors start tagging 90% DC.

2x680's and 2x1680's (4720cc/min) will support right at 500rwhp with inj DC's at 90-92% on race fuel.

So, 4x1000's (4000cc/min) can do about 425rwhp at a 40psi base. Will do about 500 to the wheels at a base pressure of 55psi (~4700cc/min).

B