Haltech Haltech Sprint RE
Thread Starter
Junior Member
Joined: Jul 2011
Posts: 30
Likes: 0
From: MN
Haltech Sprint RE
so I have a 93 13bt with a half bridge port, 550/1600 injectors
the car will start right up idle to running temp every thing looks good as I drive it it seems to be getting richer and richer
then when comming to a stop it wants to die, assuming from being so rich.
just trying to run a base map to break in the new build
i can email the map if the link dosent work.
thanks!
http://www.2shared.com/file/MB1G1-lT/wed.html
the car will start right up idle to running temp every thing looks good as I drive it it seems to be getting richer and richer
then when comming to a stop it wants to die, assuming from being so rich.
just trying to run a base map to break in the new build
i can email the map if the link dosent work.
thanks!
http://www.2shared.com/file/MB1G1-lT/wed.html
Junior Member
Joined: Feb 2010
Posts: 9
Likes: 0
From: San Ramon, CA
I did not download your fil since it wants to upload new software to view it.
I have a 550cc/2000cc set up for my cosmo engine that may help you a little. Claudio from Haltech helped me set this up. Almost sounds like your air temp or coolant temp correction are off.
Here is mine but the ignition is setup for a Cosmo with direct fire. Use at your own risk. You can import all the functions other than ignition and try it. Set up for a GT35R and 4" exhaust too.
I have a 550cc/2000cc set up for my cosmo engine that may help you a little. Claudio from Haltech helped me set this up. Almost sounds like your air temp or coolant temp correction are off.
Here is mine but the ignition is setup for a Cosmo with direct fire. Use at your own risk. You can import all the functions other than ignition and try it. Set up for a GT35R and 4" exhaust too.
