I know this isn't in the right section but i felt it would get a bit more traffic here, I'm installing a haltech E6 on our race car, the wiring diagram in the haltech book only shows Inj1,inj2,inj3,inj4. Anyone know which is front primary, rear primary, front secondary, rear secondary? or a website where i can get this info. Thanks

Andrew

 

X or K

 

just an e6, no x or k

 

I believe you just have to keep track of which is which.

You can put them in whichever configuration you like so long as you know that you put 1 in front rotor primary position.........2 in front rotor secodary position and so on

EDIT: I have only worked with the X though.......not sure of any differences between the two systems

 

most likely the same, well, if anyone else has more info it would be of help, so your saying injector 1 and inj2 are front and inj 3 and inj 4 are rear?

 

well yes.

but what Im saying is that you could have them in any configuration.......so long as you know what that configuration is.....I would recommend that one since its easy to remember

 

Throw that thing away.
Seriously.

If anything, INJ1 and INJ2 are for primaries.
INJ3 and INJ4 are for secondaries.
Since the E6-series can't do full sequential, it doesn't matter front or rear.
If you go by convention...
INJ1 - front primary
INJ2 - rear primary
INJ3 - front secondary
INJ4 - rear secondary


-Ted