RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Haltech Forum (https://www.rx7club.com/haltech-forum-62/)
-   -   Haltech Haltech Group Buy! (https://www.rx7club.com/haltech-forum-62/haltech-group-buy-29005/)

tims 11-15-01 01:19 PM

I hope everything works out and that everyone involved understands how much work it is to organise these things(I know Badass knows). I am sorry nobody wants to work with you guys but be careful. Did you try any of the companies in Australia or just the US reps?

0piston 11-15-01 03:45 PM

I contacted those two before this is what they had to say to me:
Ari told me if I haven't installed it before we are not selling it to you. Ari prolly didn't want to deal with tech support. Jim the owner from mechtech told me the haltech ecu is 1200 not 950 and then started telling me that wherever I got my information it was wrong. I'm sure they are nice guys, but I don't think I deserved attitude just because I wanted to put a haltech in my rx7 ;) I must of caught them on their bad days.


Originally posted by tims
I have bought two E6K units from two different companies and both cut me a deal from there advertised price. First one was from Rotary Performance and the second one was from MechTech Motorsports in Escondido, Ca. I believe both are authorised dealers not sure if both are on the Haltech list. Ari has helped us out with our first unit and gave us a great deal at the time(right when E6K was first introduced so was a little higher than can be had at this time.) and Jim from MechTech sold me the last one for the price I posted. About a month ago someone(who has been caught thank god) broke into my house and one of the things the stole was my E6K ECU and the cops have not been able to find it. So I emailed Jim at Mechtech to ask for the cost of a new ECU only and he quoted me $950 for ECU alone(map sensor is about $25-$30). Now Jim is a guy who only works on race cars and off road vehicles so sometimes he can be short with street car applications(doesn't usually work on street cars), but I would just not tell him the application and tell him what you want and if you gave him ten customers what the good guy price would be for what you want. My suggestion was just to find the company who wanted ten customers handed to them and was willing to take a little less on each unit to get the ten. don't make them keep a list just an agreement that once the ten are paid for this is the price. Ten person conference call or something. I just hate to see people upset at one another over a deal that saves you a couple hundred bucks(I know a couple hundred is alot of money but is worth having everybody not trust you?) Like I said before Jim is a great guy and knows alot about Haltech's and EFI in general, but is so busy he is not going to organise the deal. just tell him you got 10 customer that want your same setup and what is the price, no need to volunteer any more info. here is a link to his website http://www.mechtech-ms.com/

98lude 11-15-01 05:09 PM

Just wanted to thank badass for all his hard work. Either way, if the deal goes thru, I am still in.

thanx again.

Crusader_9x 11-15-01 11:34 PM

hey i dont know if i ever gave you guys my email or not
Crusader9x@hotmail.com
hey as long as i can get the connector kit and 02 and everyting else for $300 some odd dollars cheaper, then i am all for it and i wanted to thank badass for doing all of the work

vosko 11-16-01 06:33 PM

i'm having my mechanic call haltech since he is a real shop to see what kind of pricing he can get :) will keep you guys updated.

Crusader_9x 11-16-01 06:43 PM

did anyone ever think of trying to conta ct the hitman? maybe he can help us out on this one?

Brad 11-16-01 11:35 PM

I tried contacting HITMAN....

As many, no response.....

Manolis_D 11-17-01 09:11 PM

So now what
 
Any updates on what is happening? -- What exactly are waiting for now?

Thanks to Badass!

Brad 11-18-01 01:19 AM

Okay, I am asking YOU......


DO YOU want to go with Culver....????

$1000 shipped for ECU and 3 bar MAP sensor

LET ME KNOW....

We can get this going.....its up to YOU.....

Crusader_9x 11-18-01 10:36 AM

in my opinion i say go for cause as long as i can still order the connectors and 4wire 02 and still co meoout over 300$ ahead i say go for it

Manolis_D 11-18-01 01:18 PM

Sounds good, I say go for it

It's Haltech time :D

Thanks!,
Manolis

rxfan99 11-18-01 09:23 PM

I'm still in. I would like to use PayPal if that is all right with you.

Jason

pineapple racing 11-19-01 12:03 AM

e6k group buy
 
Looks like you guys have checked out all the sources pretty well. The e mail from FL sums it up well. It is the tech support that is so costly to the dealer. I get calls all the time from people who buy from someone else and when it doesn't work right they call me for a fix. Haltech is not real happy about the dealers with min. or no tech support sell units cheap because of this. If you don't go for the juglar the good dealers w/ support can help you out! Rob

Bacon 11-19-01 12:21 AM

well for my case i feel confident in wiring it my self, and theres plenty of people running haltec on the forum to help if i get into something i dont get...the question is can you help us out with the price rob? you were one of the places we were hoping to be able to go with..so can you? if so whats the breakdown..price, ordering, shiping...all the details if you can:D

Crusader_9x 11-19-01 11:05 AM

in my opinion we dont really need any tech support from whomever sells it to us because there is so much haltech support on and off of this forum it aint funny. there is also a yahoo haltech suppor group that is very helpful.

Brad 11-20-01 05:13 PM

Everyone check your email.

If you didnt get an email from me today then let me know so I can give you the latest info.

Bradly.Jensen@verizonwireless.com
bradlymjensen@hotmail.com

Bacon 11-20-01 09:32 PM

ok so everones whoos still in post up and what u wana do...Culver Misawa with Group A Motorsports for 1k
or Dave Dahlgren from Engine Management Systemsfor 1100




in for culver:D

Brad 11-20-01 09:44 PM

so far its (from emails I've got)

8/15 for Culver

0/15 for Dave

Bacon 11-20-01 11:00 PM

so when do we start sending the $$$

vosko 11-21-01 12:09 AM

i will let you guys know soon. gotta talk to my mechanic :)

RX-7 GT 11-21-01 02:26 AM

i might be in too. i need to see if my loan will be approved. what's the deadline?

Brad 11-21-01 11:42 AM

deadine? ha! no such thing...........

RX-7 GT 11-21-01 03:44 PM


Originally posted by BadAss
deadine? ha! no such thing...........
:yum:....what is the retail on these things?

1FastT2 11-21-01 04:30 PM

Is it still possible for me to get in on this deal? Either post a reply or e-mail me at Tuner39405@aol.com. I am really interested and have the money in hand. Thanks!

Brad 11-21-01 07:16 PM

1FastT2....of course you can still get in. I will add your email to my contact list.

The retail at Rotary Performance is $1145 for the ECU and $112 for the 3-bar MAP.

This deal brings the price down to $1000 for ECU and MAP sensor, a $257 savings.

Well guys, I've got over 85% of you saying you want to go with Culver. So, with that said, lets get the ball rolling.

You can pay my PayPal account bradlymjensen@hotmail.com

The price is $1000, or $1030 if you are paying by credit card. I know I said before that Culver would absorb the 3% paypal surcharge, but I misundrerstood his email. I apologize.

I will also take your personal checks, money orders, or cashires check. You can mail them to

Brad Jensen
10610 SE 325th St
Auburn, WA 98092

The faster I get your payment, the faster you'll get your ECU.

Also, for added security, Culver agreed that we will pay a 50% deposit, and once I receive the ECU's, he will get the other 50%.

This makes it more secure.

Any questions please call or email me. Thanks.

Brad
bradlymjensen@hotmail.com
253-334-9756


All times are GMT -5. The time now is 06:05 PM.


© 2024 MH Sub I, LLC dba Internet Brands