I am using an E6X with my 87 TII, and am currently setting up the idle, using the BAC valve. I am using version 1.26 of Halwin.

One of the options for the setup is "Warm Up TPS Threshold(%)" When I check the help, built into Halwin, it states that "Below the engine temperature this will still apply idle control"

So, I am assuming, that if I had a value of 15% set up for this option, that the idle control program, would still apply idle control until the TPS was over 15%, as long as the engine was still below the cold setting.

If the above is true, when the car is warmed up, does the idle speed control stop as soon as the TPS comes off of 0?

Thanks for any help.

Greg