What carbon/fiberglass parts you want made?/Intro
Hello rx7 club
We (Devari) specialize in carbon fiber and fiberglass parts for the automotive industry and would like to expand our inventory to the rx7 chassis. We could make both hand laid pieces which are strong but on the heavy side and vacuumed infused pieces which are strong, light weight but cost significantly more then the hand laid pieces. Here are some pictures of our work from the molding process, vacuum process and finish products..... Molds http://i49.photobucket.com/albums/f2...20339_1443.jpg http://i49.photobucket.com/albums/f2...20339_1443.jpg http://i49.photobucket.com/albums/f2...20339_1443.jpg Vacuum process http://i49.photobucket.com/albums/f2...20339_1443.jpg Finish products http://i49.photobucket.com/albums/f2...20339_1425.jpg http://i49.photobucket.com/albums/f2...20339_1443.jpg http://i49.photobucket.com/albums/f2...0010075682.jpg http://i49.photobucket.com/albums/f2...00010075-1.jpg So let us know what pieces you guys want made from oem, replicas(prefer not to do) and parts that aren't offered yet. I will check up on this thread to see which part has the most interest and will hopefully start a group buy for it and so on.... After the group buys are over the products are still offered but not at group buy pricing. BTW Im not new to this forum my regular forum account is S14.3REW Email- Moe_Devari@yahoo.com Moe |
Our first group buy will be for the FD Sun Roof, which will be setup later tonight.
|
I'm in for a vac-infused carbon sunroof. I'll try to dig up the old GB threads from other vendors to ping potentially interested parties.
|
Race and OEM Door panels. Maybe integrate the door panels and trim panels together.
https://www.rx7club.com/showpost.php...2&postcount=22 |
Carbon dash for racing with incorporated gauge hood.
|
What about shaved interior panels(center console, radio trim and gauge hood) where you could at your own gauges and switches etc.
For example.... This but with out the holes and coin tray only the shifter hole will be there. http://i49.photobucket.com/albums/f2...7/DSC00245.jpg Blank radio trim to add your own electronics http://i49.photobucket.com/albums/f2...7/DSC00071.jpg http://i49.photobucket.com/albums/f2...IMG_3365-1.jpg I was also thinking of re producing these engine pieces from my old car. http://i49.photobucket.com/albums/f2...DSC00351-1.jpg Intercooler ducts for the people with a DIY M2/ASP intercooler style. Replica of one of those Japanese air intake/duct |
OEM Carbon rear Lip?
Also check us out on Face Book http://www.facebook.com/home.php?#!/...7568211&ref=ts |
What about carbon upper intake manifold? That way it won't heat soak like the stock piece... Or would that be too difficult, and extremely expensive?
|
Originally Posted by rotarymandan
(Post 10102347)
What about carbon upper intake manifold? That way it won't heat soak like the stock piece... Or would that be too difficult, and extremely expensive?
If a full replacement you are correct about it being difficult and expensive. |
how about making this. I'm sure a couple folks out there want this aswell
http://i719.photobucket.com/albums/w...a00e0_ored.jpg |
How about making the asuka fenders as well. I like the center console.
|
Originally Posted by Laz93RX7
(Post 10102460)
how about making this. I'm sure a couple folks out there want this aswell
http://i719.photobucket.com/albums/w...a00e0_ored.jpg And maybe something to mount stuff into the glove box like this http://i7.photobucket.com/albums/y25...els2006017.jpg |
Originally Posted by shmacklepap
(Post 10103099)
YES.
And maybe something to mount stuff into the glove box like this This piece and any other flat pieces are easy to DIY, you could purchase flat sheets of carbon from us also, we just need the dimensions
Originally Posted by Laz93RX7
(Post 10102460)
how about making this. I'm sure a couple folks out there want this as well
For example on the red FD it has the same piece but only works with M2 intake/IC But we could make flat sheets of carbon and you could cut it your self to fit your application.
Originally Posted by fritts
(Post 10102484)
How about making the asuka fenders as well. I like the center console.
Center console is wrapped in carbon, we could also do carbon wrap/over lay on any piece just PM for a quote. FD Mud Guards? R1 Lip? |
not offering anything in the way of autoclave?
|
I like some of the covers, cleans things up.
|
Interior plastics.... OEM style.
Meaning door plastics, center shift console, center gauge console, drivers speedo/tach console & top dome piece. Another vendor attempted but I missed the opportunity. I'm just after replacing the old, brittle OEM plastics with something stronger and better lasting. Would prefer an OEM finish, but realize I'd probably need to have the carbon fiber painted. As usual, demand & pricing will dictate. Seeing as how many FD's have broken OEM interior plastic pieces... it may return the most bang for your investment buck. |
Originally Posted by hwnd
(Post 10103901)
not offering anything in the way of autoclave?
|
As above, full interior for RHD.
|
If you're just overlaying and not making entirely new pieces, it would be sweet to just send in all the plastics and the customer could just mark what they want shaved. For example, I would like all the interiors plastics covered, and blanking the center console and radio bezel would be fine, but I still want A/C controls and such. Interior door panels are already made by Seibon among others, so I wouldn't bother with that unless you can do it at a significantly cheaper cost. Interior pieces I also think would fine with just hand layed, so long as the finish came out good enough? If a full interior would be way time consuming and expensive, I would be down for just the normal gauge bezel & hood/shifter plate like Rc80 said. Especially if I can get it done in plain weave like the rest of my stuff. Blank the radio DIN would be a plus.
|
Originally Posted by rc80
(Post 10104335)
Interior plastics.... OEM style.
. Id be down for that id even lend you some interior parts i got laying around |
Originally Posted by Sarusanj
(Post 10106255)
If you're just overlaying and not making entirely new pieces, it would be sweet to just send in all the plastics and the customer could just mark what they want shaved. For example, I would like all the interiors plastics covered, and blanking the center console and radio bezel would be fine, but I still want A/C controls and such. Interior door panels are already made by Seibon among others, so I wouldn't bother with that unless you can do it at a significantly cheaper cost. Interior pieces I also think would fine with just hand layed, so long as the finish came out good enough? If a full interior would be way time consuming and expensive, I would be down for just the normal gauge bezel & hood/shifter plate like Rc80 said. Especially if I can get it done in plain weave like the rest of my stuff. Blank the radio DIN would be a plus.
For replacement parts if there are interest i could do a kit which includes 3 pieces center console, radio trim and gauge bezel/hood. |
how much to make this hood for the FC3s?
http://www.rhdjapan.com/media/catalo...mal/Image1.jpg http://www.rhdjapan.com/media/catalo...mal/Image2.jpg http://www.rhdjapan.com/media/catalo...mal/Image1.jpg |
^^^
If there is interest i doubt we could make a replica because first we need to find that hood to make a mold out of and by the looks of it that piece is from japan so i think it would be hard to obtain. Interior pieces are definitely in our future plans. |
How about the carbon fiber oem aluminum scuff plates?
|
Originally Posted by rlee429
(Post 10108923)
How about the carbon fiber oem aluminum scuff plates?
|
I think there is but he seems to be M.I.A
|
How about first generation hoods?
|
fb hood would be cool
|
Originally Posted by Jmthegerm66
(Post 10113234)
fb hood would be cool
Originally Posted by 13x
(Post 10109746)
How about first generation hoods?
|
What about CF turbo 2/enfin oem side skirts for FCs, that would be cool.
Also a nice looking rear lip that has only the left hole cut out for us people with corksport exhaust systems. |
Door panels
Most FD owners need interior door panels that don't creak and stretch and sound like they're going to break every time you pull the door closed.
|
What about CF turbo 2/enfin oem side skirts for FCs, that would be cool.
Also a nice looking rear lip that has only the left hole cut out for us people with corksport exhaust systems. |
Can you do pieces in a matte finish
|
or a matte finish overlay
|
Originally Posted by 20B 3rd Gen
(Post 10116050)
Can you do pieces in a matte finish
|
yes that what im talking about, how much to overlay a tailight cover
|
Originally Posted by 20B 3rd Gen
(Post 10116058)
yes that what im talking about, how much to overlay a tailight cover
|
As odd as this sounds, I'd love a CF air intake bottom half. I'd like to retain everything about the upper half (especially to pass a quick visual inspection), but have the bottom half accept a k&n and be lower-profile to allow for the radiator fans to flow more easily. A rectangular feed tube, running the length of the k&n filter (or as long as possible) which fits down beside the radiator to allow for higher and cooler air flow, angled such that the lowest part is toward the rear of the car, and it forms a pseudo ram-air effect. I guess it would slope at a similar angle to the radiator? The bottom shape (if looking from the front bumper), ideally, would be like a Y so that the rectangular tube can evenly distribute across the filter, while still allowing more room for the radiator air flow.
I'm not sure if the Fluidyne radiator is wider than the stock one, but I'm hoping it's not, because that's what I have. |
Any estimated pricing on an interior center console/radio trim/gauge cover/gauge hood kit? For the right price and a plain weave option I'm in right meow.
|
Originally Posted by Sarusanj
(Post 10117027)
Any estimated pricing on an interior center console/radio trim/gauge cover/gauge hood kit? For the right price and a plain weave option I'm in right meow.
no pricing yet but will be affordable, for this would you guys be interested in fiberglass version but wrap in carbon interior fabric? It will be cheaper and i think the carbon fabric feels/looks better for interior parts. This is what im talking about. http://www.pyspeed.com/product-p/rd-8001.htm I think its a waste to use real carbon to make interior pieces. Also the carbon gets scratch easier compared to the interior fabric. |
Originally Posted by S14.3REW
(Post 10117069)
We won't be starting on this for a while maybe in like 2 months.
no pricing yet but will be affordable, for this would you guys be interested in fiberglass version but wrap in carbon interior fabric? It will be cheaper and i think the carbon fabric feels/looks better for interior parts. This is what im talking about. http://www.pyspeed.com/product-p/rd-8001.htm I think its a waste to use real carbon to make interior pieces. Also the carbon gets scratch easier compared to the interior fabric. I'm only interested in new pieces to replace the oem junkers I have now. Rich |
Some pics of what we've been working on.
Evo fenders http://i49.photobucket.com/albums/f2...Picture068.jpg http://i49.photobucket.com/albums/f2...Picture069.jpg Customer car(widebody install/paint job) http://i49.photobucket.com/albums/f2...Picture070.jpg |
Originally Posted by Laz93RX7
(Post 10102460)
how about making this. I'm sure a couple folks out there want this aswell
http://i719.photobucket.com/albums/w...a00e0_ored.jpg http://i726.photobucket.com/albums/w...neBayCover.jpg |
An 84-85 Blanked center console piece or one with atleast the top 3 holes and vents [without the shutters] would be absolutely awesome as replacements cost an arm and a leg and would allow for gauge and possibly aftermarket radio install easier.
http://www.mazdatrix.com/pictures/l-...0B-FA57-07.jpg |
Originally Posted by DarrenTRS
(Post 10122489)
An 84-85 Blanked center console piece or one with atleast the top 3 holes and vents [without the shutters] would be absolutely awesome as replacements cost an arm and a leg and would allow for gauge and possibly aftermarket radio install easier.
http://www.mazdatrix.com/pictures/l-...0B-FA57-07.jpg |
Originally Posted by Fortune_Seven
(Post 10120743)
I'd be in for a version of the above, as well as a cover for close to the firewall but not necessarily attached to the strut towers, similar to this:
http://i726.photobucket.com/albums/w...neBayCover.jpg |
Originally Posted by rc80
(Post 10117319)
If you can make it in black fiberglass I'd take that. No wrap.
I'm only interested in new pieces to replace the oem junkers I have now. Rich Indeed. I'm not a fan of the fabric wrap. Either real carbon, or maaaaaybe paintable fiberglass. (Though I'm not really a fan of that either.) |
Rear nonbose hatch cover...should be easy enough. Seems like there are always people looking for the OEM non bose one.
|
I'd love to get a hold of some stronger driver side door cup, and cubby for the FD's, OEM's cost around 100 and they're the same weak plastic crap.
|
Originally Posted by curacaosfinest
(Post 10122499)
i would be second in line for this!! :nod:
|
All times are GMT -5. The time now is 09:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands