RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   Group Buy & Product Dev. FD RX-7 (https://www.rx7club.com/group-buy-product-dev-fd-rx-7-269/)
-   -   GB interest: Exterior aluminum door handles - SakeBomb Garage (https://www.rx7club.com/group-buy-product-dev-fd-rx-7-269/gb-interest-exterior-aluminum-door-handles-sakebomb-garage-978512/)

SakeBomb Garage 11-28-11 03:41 PM

GB interest: Exterior aluminum door handles - SakeBomb Garage
 
This thread is to gauge interest in possibly offering replacement exterior door handles for the FD. Please *DO NOT* add your name unless you are *ACTUALLY INTERESTED* in purchasing replacement exterior handles for your car. We need an accurate gauge of how much interest there would be in these parts to see if offering them would be a possibility based on production numbers and cost.

Here's the skinny: We're working on possibly offering replacements for the plastic exterior door handles. As many of you know the exterior door handle *shell* is cast aluminum, but to cut costs mazda used a plastic handle pull insert (the part you actually pull on). Unfortunately as many of us know, over time the plastic becomes brittle, and the door lock mechanism becomes stiff, leading to the unfortunate day that you go to open your door and snap the handle off. Nothing like literally holding a broken piece of your FD in your hand to ruin your day, and then to call the dealer and find out that the replacements are, how should we say, not "cheap" :lol:

Solution? Aluminum replacement door handle grabs.

http://i723.photobucket.com/albums/w...e/IMG_0838.jpg

Fix it once, Fix it Right! These handles should last the life of your car. Even if your handles aren't yet broken (due to the age of the plastic, and lock mechanism) we've noticed a huge increase with friends and customers cars over the last couple years. At this point it honestly just seems like a matter of time before the old plastic handles let go (I babied my 93 AND 94 FDs and broke handles on both in the last two years, spending ridiculous amounts of money on plastic Mazda replacements). Two months back another handle broke, and I'd had it. Time for a permanent fix.


If you are *seriously* interested please add your name below. With enough people on board we can make this happen (we would need 40-50 people to put this into production)

The estimated cost would be around $200 for a set shipped (give or take) and we might even be able to do a discounted package deal with our interior replacement aluminum door handles that we already produce ->
https://www.rx7club.com/group-buy-product-dev-fd-rx-7-269/gb-fd-aluminum-passenger-door-handle-sakebomb-garage-922132/



http://i723.photobucket.com/albums/w...le/handle6.jpg


Thanks,
Heath and Dan :icon_tup:

SakeBomb Garage 11-28-11 03:42 PM

Interest List:

Ex. Scrub
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
.
.
.

Gringo Grande 11-28-11 04:38 PM

What is the difference between what you are proposing and what these guys do? http://www.rx7doorhandles.com/

SakeBomb Garage 11-28-11 05:40 PM


Originally Posted by Gringo Grande (Post 10879336)
What is the difference between what you are proposing and what these guys do? http://www.rx7doorhandles.com/

I have no clue, I've never played with a set of their handles, and didn't know they existed till now. Their casting looks pretty rough (though you'll only see the front surface which hopefully is finished smoothly), but there seems to be a ton of material added to the back, which honestly is complete overkill strength wise. It was probably done for ease of drafting (pulling it out of the mold), but it's basically unnecessary weight. Ours is pretty much an exact casting of the stock mazda handles, but in aluminum. I can't comment on the fit of theirs, but at the end of the day we're both pretty close to each other as far as pricing, (I think we could end up slightly cheaper, but if you know our products... "cheap" isn't what we're after, just quality products).

We were estimating somewhere around $200 for the pair shipped, or $399 for a pair of exterior + our interior handle shipped.

Tuesday 11-29-11 01:13 PM


Originally Posted by SBGarage (Post 10879431)
We were estimating somewhere around $200 for the pair shipped, or $399 for a pair of exterior + our interior handle shipped.

I wish I would of waited. I paid that much just for the interior handle. And now I can use a set of aluminum outside handles.

mrhetrick 11-29-11 06:37 PM

Yes for me!!! Could possibly be talked into an interior one as the GB gets closer.

Interest List:

1. mrhetrick
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.

CrispyRX7 11-29-11 08:48 PM

Dan, You know I'm good for a pair. I don't need them right now but ya never know.
Regards,
Crispy
- Lifelong SB patron

Interest List:

1. mrhetrick
2. CrispyRX7
3.
4.
5.
6.
7.
8.
9.
10.
11.

GoodfellaFD3S 11-29-11 11:29 PM

:love:

Chon 11-30-11 11:01 AM

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4.
5.
6.
7.
8.
9.
10.
11.

beckrx 11-30-11 07:06 PM

I am a very satisfied SB multi-puchase customer. Count me in!

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5.
6.
7.
8.
9.
10.
11.

Tuesday 12-05-11 10:21 PM

Count me in, provided I have the money. If it gets closer to the 40-50 person minimum and it looks like I cant come through, I'll just remove myself from the list.

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6.
7.
8.
9.
10.
11.

Piglet 12-05-11 10:43 PM

is this an option? $399 for a pair of exterior + our interior handle shipped.
if i wanted that deal should i put my name on this list?

Orbitalmovment 12-06-11 09:31 PM

None of my handles are broken so this is the perfect opportunity to throw money at it, hopefully it'll make the broken items on my car jealous that they aren't getting the attention.

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7.
8.
9.
10.
11.[/QUOTE]

Sephek 12-06-11 10:00 PM

How about you thrown in a deal with the footrest :D

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7.Sephek- int/ext (93)
8.
9.
10.
11.[/quote]

potatochobit 12-06-11 10:14 PM

I need a new handle like everyone else but isnt the actual problem inside the latch?
my plastic handle goes up and down fine, its just not springy
is this just a replacement for latches that are cracked?

SakeBomb Garage 12-07-11 04:04 PM


Originally Posted by potatochobit (Post 10890434)
I need a new handle like everyone else but isnt the actual problem inside the latch?
my plastic handle goes up and down fine, its just not springy
is this just a replacement for latches that are cracked?

Have you oiled the inside or you actually have some internal mechanism that's cracked? I'm looking at one now and there is a spring, and a few hinge/joints... the internals are all metal construction aside from the handle itself. With a new aluminum handle... it just needs to be oiled (or your spring has come off). :)

Mister Destiny 12-08-11 04:34 PM

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9.
10.
11.

chill93fd 12-08-11 04:37 PM

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Chill93FD- Package deal for 93
8.
9.
10.
11.

Flat_Boostin' 12-08-11 10:06 PM


Originally Posted by Gringo Grande (Post 10879336)
What is the difference between what you are proposing and what these guys do? http://www.rx7doorhandles.com/

Do urs open and close without modification to the handles? I had to dremel the ones I got from them and the passenger door still doesnt open and the drivers side is getting harder to open every day

RotorMotor 12-09-11 03:21 AM


Originally Posted by Flat_Boostin' (Post 10893201)
Do urs open and close without modification to the handles? I had to dremel the ones I got from them and the passenger door still doesnt open and the drivers side is getting harder to open every day

Yes, these are EXACT replicas of the stock plastic handles. If you ask anyone about SBG products you'll probably hear the same thing... we aren't the cheapest out there, but our quality is second to none. We build parts that we literally put on our own cars (5 FD's between us) and we are both extremely, how do you say... anal retentive about the details, quality, looks, fitment, etc of the parts that go on them. :)

Flat_Boostin' 12-09-11 09:29 AM

Add me to the list please, I'm worried one day I might not be able to get in my car

Flat_Boostin' 12-09-11 09:32 AM

Add me to the list please

]Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Chill93FD- Package deal for 93
8. Flat_Boostin'
9.
10.
11.

theorie 12-09-11 09:59 AM

Of course I'll need a set. :D

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Chill93FD- Package deal for 93
8. Flat_Boostin'
9. theorie
10.
11.

KaoticFdR1 12-09-11 01:40 PM

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Chill93FD- Package deal for 93
8. Flat_Boostin'
9. theorie
10. KaoticFDR1
11.

RENESISFD 12-09-11 01:46 PM

Why not:dunno:

Interest List:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Chill93FD- Package deal for 93
8. Flat_Boostin'
9. theorie
10. KaoticFDR1
11.RENESISFD
12.


John

limepro 12-09-11 02:28 PM


Originally Posted by potatochobit (Post 10890434)
I need a new handle like everyone else but isnt the actual problem inside the latch?
my plastic handle goes up and down fine, its just not springy
is this just a replacement for latches that are cracked?

WD40 in the keyhole and behind the handle works wonders, mine was very hard to pull now they open very easily after a good spray.

Sephek 12-09-11 04:27 PM

Somebody bumped us out of the list:dunno:

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
9. Flat_Boostin'
10. theorie
11. KaoticFDR1
12.RENESISFD
13.

Sephek 12-09-11 04:29 PM

edit-

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD

SakeBomb Garage 12-09-11 05:45 PM


Originally Posted by Sephek (Post 10890405)
How about you thrown in a deal with the footrest :D

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7.Sephek- int/ext (93)
8.
9.
10.
11.

[/QUOTE]

We could do the footrest as an alternative for the same pricing / deal

RotorMotor 12-09-11 06:58 PM


Originally Posted by limepro (Post 10893956)
WD40 in the keyhole and behind the handle works wonders, mine was very hard to pull now they open very easily after a good spray.

I'd actually recommend pulling off the interior plastic cover as it gives you much more access to the various components that bind overtime. Obviously any lubrication helps, but you can only do so much through the actual keyhole.

justaimme 12-14-11 03:34 AM

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94

13bturborx7 12-16-11 08:20 AM


Originally Posted by justaimme (Post 10899319)
1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94

15. 13bturborx7- Exterior Handles and interior handle package for 93

SakeBomb Garage 12-16-11 09:51 PM

Package Deals: Exterior Handles + Another Item

Combine any of the following for 2 or more items, for the following pricing



Exterior Door Handles $180 http://i723.photobucket.com/albums/w...h_IMG_0838.jpg


Interior Door Handle $220 http://i723.photobucket.com/albums/w...th_handle7.jpg


LHD Passenger Footrest (Spirit R) $220 http://i723.photobucket.com/albums/w...h_IMG_6885.jpg


GM 3bar MAP Sensor Bracket $40 http://i723.photobucket.com/albums/w...th_things2.jpg

SS Brake Lines $105 (on back order, in stock soon) http://i723.photobucket.com/albums/w...1024Medium.jpg

RotorMotor 12-18-11 04:16 AM

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94
15. 13bturborx7- Exterior Handles and interior handle package for 93

GS+ 12-18-11 05:58 PM

1. mrhetrick
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94
15. 13bturborx7- Exterior Handles and interior handle package for 93
16. GS+: Exterior door handles and SS brake line package

mrhetrick 12-18-11 07:33 PM

1. mrhetrick (exterior door handles and interior handle '93 finish) = what price?? Confused by previous pricing...
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94
15. 13bturborx7- Exterior Handles and interior handle package for 93
16. GS+: Exterior door handles and SS brake line package

13bturborx7 12-18-11 07:39 PM

do you guys still sell the map pocket cover piece in aluminum?

RotorMotor 12-19-11 02:21 PM


Originally Posted by mrhetrick (Post 10904505)
(exterior door handles and interior handle '93 finish) = what price?? Confused by previous pricing...

The above pricing applies to customers who would like to purchase the exterior door handle along one or more of the other "accessories" listed (as long as supplies last).

raceratheart15 12-19-11 05:01 PM

1. mrhetrick (exterior door handles and interior handle '93 finish) = what price?? Confused by previous pricing...
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94
15. 13bturborx7- Exterior Handles and interior handle package for 93
16. GS+: Exterior door handles and SS brake line package
17. raceratheart15 just door exterior handles

RotorMotor 12-19-11 11:26 PM


Originally Posted by 13bturborx7 (Post 10904513)
do you guys still sell the map pocket cover piece in aluminum?

Nope, we never ended up making it as another vendor jumped in right before the production run and decimated our list by offering it for 20 cheaper... I don't think they make it any longer and people were having problems with them breaking other plastic pieces because they didnt address the roll pin problem (the real cause of the deteriorating map pocket lids). But sadly, without the numbers, we can't make it because the mold costs are too expensive for only a handful of parts.

13bturborx7 12-21-11 03:49 AM


Originally Posted by RotorMotor (Post 10905892)
Nope, we never ended up making it as another vendor jumped in right before the production run and decimated our list by offering it for 20 cheaper... I don't think they make it any longer and people were having problems with them breaking other plastic pieces because they didnt address the roll pin problem (the real cause of the deteriorating map pocket lids). But sadly, without the numbers, we can't make it because the mold costs are too expensive for only a handful of parts.

I think you guys should do another intrerest thread to see what you can get. Just mension that problem that people have with other map pocket lids and see what happens lol. I would rather buy somthing from you then these other people. I need a lid but dont trust these other people that dont address all problems.

beckrx 12-21-11 05:52 PM

I will be the first on the list if you run another interest thread....

Davin 12-23-11 09:06 PM

I am down for a set of interior and exterior handles.

Davin 12-23-11 09:08 PM

And the bracket thing too.

ImStillOnJava 12-24-11 09:56 PM

1. mrhetrick (exterior door handles and interior handle '93 finish) = what price?? Confused by previous pricing...
2. CrispyRX7
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94
15. 13bturborx7- Exterior Handles and interior handle package for 93
16. GS+: Exterior door handles and SS brake line package
17. raceratheart15 just door exterior handles
18. ImStillOnjava ; just door exterior handles

CrispyRX7 12-25-11 04:14 PM

1. mrhetrick (exterior door handles and interior handle '93 finish) = what price?? Confused by previous pricing...
2. CrispyRX7 - exterior door handles only
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94
15. 13bturborx7- Exterior Handles and interior handle package for 93
16. GS+: Exterior door handles and SS brake line package
17. raceratheart15 just door exterior handles
18. ImStillOnjava ; just door exterior handles

Davin 12-27-11 08:51 AM

1. mrhetrick (exterior door handles and interior handle '93 finish) = what price?? Confused by previous pricing...
2. CrispyRX7 - exterior door handles only
3. Chon
4. Beckrx
5. Tuesday (I should really get a better username)
6. Orbitalmovment - Interior exterior package deal
7. Sephek - int/ext (93)
8. Mister Destiny
9. Chill93FD- Package deal for 93
10. Flat_Boostin'
11. theorie
12. KaoticFDR1
13.RENESISFD
14. justaimme - Footrest deal for 94
15. 13bturborx7- Exterior Handles and interior handle package for 93
16. GS+: Exterior door handles and SS brake line package
17. raceratheart15 just door exterior handles
18. ImStillOnjava ; just door exterior handles
19. Davin - exterior door handles, Interior door handle (smooth) & MAP sensor bracket

GS+ 01-16-12 10:05 AM

C'mon! There have got to be more than 19 FD enthusiasts who want and need these high quality handles!

tv4184 01-17-12 09:47 AM

I'm one but I met my quota for car expenditures until February :(

Flat_Boostin' 01-20-12 04:48 AM


Originally Posted by tv4184 (Post 10940322)
I'm one but I met my quota for car expenditures until February :(

The group buy list needs to hit around 40 for them to do it anyway so I think you'll be fine


All times are GMT -5. The time now is 09:12 PM.


© 2024 MH Sub I, LLC dba Internet Brands