GB #2: FC3S bi-xenon hid retrofit!
This is what will be included with each kit:
Oem quality 35w ballast Oem quality 4300k d2s bulb PNP wiring harness New headlight housing Bi-xenon projector with clear lens Alcohol wipes for bulbs This kit is designed to be a true PNP application no messing around with spacers or cutting up your car! The install will be as easy as changing a burnt out headlight. My kit offers a bi-xenon (high/low) projector with a unique mounting point which saves on labor cost and the housing does not get cut up to fit the projector. The end result offers a very clean setup. Price is $495 if we can get five people to sign up then the price will go down to $470! Here is what they will look like http://i159.photobucket.com/albums/t...7/DSC06310.jpg What's included http://i159.photobucket.com/albums/t...7/DSC05759.jpg E55 shroud http://i159.photobucket.com/albums/t...7/DSC05644.jpg E46 shroud http://i159.photobucket.com/albums/t...7/DSC05657.jpg Back of projector http://i159.photobucket.com/albums/t...7/DSC05659.jpg Projector cutoff http://i159.photobucket.com/albums/t...7/DSC05440.jpg I am very experienced in retrofitting many different cars and I want to give back to fellow 7 owners with a quality kit at an affordable price. To show my craftsmanship below are some examples of retrofits I have done: Subaru Impreza http://i159.photobucket.com/albums/t...007/subaru.jpg Miata http://i159.photobucket.com/albums/t...7/DSC05726.jpg FD3S with e55 http://i159.photobucket.com/albums/t...7/DSC05488.jpg FD3S with e46 http://i159.photobucket.com/albums/t...7/DSC05725.jpg |
If anyone wants to have Philips 85122+ bulbs instead of the Morimoto I can do that for an extra $45.
|
these are nice I may have to get my hands on a pair of these sometime around the end of this year to next year.... would you be able to do Titan lights also?
|
how much for just the retrofitted lenses? I already have hids in mine.
BTW these look sexy as fuuhh |
Originally Posted by timelessdigity
(Post 10717197)
how much for just the retrofitted lenses? I already have hids in mine.
BTW these look sexy as fuuhh |
does the price include shipping?
|
Originally Posted by R-X-R
(Post 10721089)
does the price include shipping?
|
I'll be interested in about 3 weeks when I get paid.
|
This group buy still going on? if so i am in
|
Same here! I'm in Canada though, is that a problem?
|
Originally Posted by spiff-d
(Post 10768797)
Same here! I'm in Canada though, is that a problem?
|
What would the total cost plus shipping be to 91107?
|
Originally Posted by Sgtbaker
(Post 10773375)
What would the total cost plus shipping be to 91107?
|
Have you been able to get the housings?
|
Originally Posted by tv4184
(Post 10829547)
Have you been able to get the housings?
For fc yes for the fd I get only about 2 every couple of months they are really hard to find. |
Which bi-xenon projector is used in these retrofits? Do you have pictures of the low/high beam comparison cutoffs?
Just to confirm, do you have the FC units in stock as of today? Thanks for your contribution to the community! |
Still got these for sale? Would like to see a picture of the glass retros if you have any available. Thanks
|
I use the mini d2s it is only one that I could fit that didn't require cutting the frame.
I usually don't stock the retrofit's I make them on demand and it takes about 3 weeks for you to receive them. The glass housing look exactly the same but the cutoff is not as crisp as seen in the photos. |
Can I put a downpayment for one, and pay full upon completion?
-Shaun |
Okay so the solenoid is activated by the high beam switch I guess. Can you please show pictures of the low and high beam patterns?
This sounds great though, I so missed my high beams when I did my TSX retrofit..... |
Originally Posted by turboIIrotary
(Post 10833939)
I use the mini d2s it is only one that I could fit that didn't require cutting the frame.
I usually don't stock the retrofit's I make them on demand and it takes about 3 weeks for you to receive them. The glass housing look exactly the same but the cutoff is not as crisp as seen in the photos. |
deff will be interested in these here soon!
|
+1 for pics of the cutoff beam hi/low. I have $$$ now to buy. also a pic of them installed?
|
Ordered a set from him. He said it was completed on Monday. When I get them, I will document everything I can.
-Shaun |
Pic of cut off beam from his original GB thread.
|
Sorry everyone for not answering questions this week is very busy I will have time next week to get more pictures!
Here is a picture that a member sent to me. http://i159.photobucket.com/albums/t...7/img_6883.jpg |
Okay guys, I finally got the kit in today and installed it the same day. Ordered the kit Oct 26. Arrived at my door November 24. That is 29 days. So if you order it during a time when TurboIIRotary is busy, expect longer than the estimated 3 weeks. The kit comes with everything you need and it is plug and play. I got the e55 shroud with 6k bulbs.
Quality of the housings look good. However I did notice condensation developing inside the housing. The heat from the bulb is able to evaporate any water in front of the lens except below it. Most of the water builds up in the lower corners. This may cause problems down the road especially for a plastic housing. Will hasten yellowing and other damaging weather effects. Installing the kit in a stock FC is pain because of how close the ballast needs to be. The length of the wires is not enough to remote mount at cleaner areas. For stock RX7 you'll need to remove the intake box for the passenger side. I think the best place to mount it is somewhere inside the headlight structure. For me, it was late and I did not want to figure out a way to do this so I just mounted it right next to the rubber grommet with the headlight wires past through. I will relocate the ballast in the future. You can use the stock brackets to hold the new housing to the headlight frame but you will need to pick up extended bolts and spacers. I went to Lowes and picked up (8) nylon spacers 3/8 x .171 x 1/4 and (8) m4-.70 x 20 screws/bolts. I'm not quite sure how I should be adjusting the angles but the cut off is ridiculous. It may be cleaner than my Escalade. The cut off for the high beam isn't too shabby either but not as clean as the lows. The 6k bulbs were exactly what I was hoping for. A mild blue tint in the lighting. The housing does get warm but compared to my cousin's HID kit, this one isn't too bad. My cousin did have a 55w ballast and has glass housings. Here are some pictures. I may get some more up later. http://img.photobucket.com/albums/v3...-04-35_154.jpg http://img.photobucket.com/albums/v3...-05-40_218.jpg http://img.photobucket.com/albums/v3...-10-12_207.jpg http://img.photobucket.com/albums/v3...-10-31_939.jpg http://img.photobucket.com/albums/v3...-16-55_950.jpg http://img.photobucket.com/albums/v3...-15-41_190.jpg http://img.photobucket.com/albums/v3...-10-52_788.jpg http://img.photobucket.com/albums/v3...-16-02_258.jpg http://img.photobucket.com/albums/v3...-16-16_377.jpg -Shaun |
Thanks for the review! To be clear the spacers are for the headlight housing mount because the pilot automotive housings are thicker than the stock ones they are not to space the headlight for clearance. I will also include the spacers and screws from now on for each kit so you don't have to go out and buy some.
|
Here are more daylight shots of the kit.
http://img.photobucket.com/albums/v3...-35-29_572.jpg http://img.photobucket.com/albums/v3...-36-36_399.jpg http://img.photobucket.com/albums/v3...-35-42_403.jpg http://img.photobucket.com/albums/v3...-37-05_816.jpg http://img.photobucket.com/albums/v3...-35-56_213.jpg http://img.photobucket.com/albums/v3...-36-09_133.jpg http://img.photobucket.com/albums/v3...-36-54_348.jpg -Shaun |
i used the same kit but it was a DIY not his and also was frustrated with the length of the ballast wire.
They now offer extended length wiring for the ballast. |
Originally Posted by Rob XX 7
(Post 10876381)
i used the same kit but it was a DIY not his and also was frustrated with the length of the ballast wire.
They now offer extended length wiring for the ballast. |
Originally Posted by Rob XX 7
(Post 10876381)
i used the same kit but it was a DIY not his and also was frustrated with the length of the ballast wire.
They now offer extended length wiring for the ballast. I ordered the extended ballast for a fd retrofit and they are different now looks like a lot of improvements I will post up a piture later to to show the difference. |
Originally Posted by HOZZMANRX7
(Post 10879283)
Keep in mind the ballasts are very sensitive to heat. So mounting them outside the engine bay and where they can get lots of air flow should be a priority. I like that well between the headlight bucket and radiator.
|
Originally Posted by Sgtbaker
(Post 10735774)
I'll be interested in about 3 weeks when I get paid.
+1 lol |
Might have to pick one of these up after I move next month.
|
Might be ordering myself a pair pretty soon...
|
These still begin sold? I would like a set for my FC shipped to Canada.
|
yea i am interested
|
The difference these lights make is AMAZING!! However, I will advise that it seems much more grinding is apparently needed to get them to fit a Vert.
|
Originally Posted by HOZZMANRX7
(Post 11040577)
The difference these lights make is AMAZING!! However, I will advise that it seems much more grinding is apparently needed to get them to fit a Vert.
I am currently not making them but i will start another group buy the beginning of summer. |
definatly interested!!!
|
I'm interested when you start the next group buy. I have a friend who runs these and gives you rave reviews.
|
Let me know about the next group buy!!!
|
Please let me know as well! Another Canadian interested in these!
|
Let me know as well! Would love a set of these!
|
Those look mighty bright!
|
I'm interested in this group buy! Pm me when it starts please!!
|
i need to sell some things !!
|
So how about a group buy sir .... looks like you have enough for at least 7???
pretty please? |
All times are GMT -5. The time now is 02:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands