Full Function Engineering
Thread Starter
Joined: Jul 2003
Posts: 1,042
Likes: 0
From: Nashville, TN
I purchased a full set of ID injectors from FFE a few weeks ago. They have fantastic customer service. 4x ID1000 injectors that were nicely packaged and labeled for pri/sec and was provided the full dead time table to properly set them up when installed.
As far as the ID injectors, My AFRs are noticably smoother at WOT and my idle is considerably smoother with very little movement in AFR when compared to my stock 550/750 RCeng style injectors.
I recommend FFE for any service they can provide, especially when dealing with Injector Dynamics injectors. Hopefully in the near future I'll grab their trigger wheel kit!
Thanks Jason!
As far as the ID injectors, My AFRs are noticably smoother at WOT and my idle is considerably smoother with very little movement in AFR when compared to my stock 550/750 RCeng style injectors.
I recommend FFE for any service they can provide, especially when dealing with Injector Dynamics injectors. Hopefully in the near future I'll grab their trigger wheel kit!
Thanks Jason!
+1 on this thread, I bought there Trigger wheel kit before it was open to the market, there customer service, there product, shipping, and just all around business practice is above and beyond and I could have not been more happy with everything from start to end.
Thanks again
Thanks again
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
Aug 22, 2015 05:52 PM



