Will 850cc sard injectors fit inside fd3s primary rail?
Will 850cc sard injectors fit inside fd3s primary rail?
Hi guys
I am planning to buy sard 850cc injectors from rhd japan
I would like to run 850cc all around
Can sumone pls. Confirm that these injectors will work fine with the fd stock primay rail
I have 1994 jdm fd3s
Thanx
Anees
I am planning to buy sard 850cc injectors from rhd japan
I would like to run 850cc all around
Can sumone pls. Confirm that these injectors will work fine with the fd stock primay rail
I have 1994 jdm fd3s
Thanx
Anees
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
I got a set of 850's that you can test if ya want to try them LMK.
They were Bought off the 3rd gen FS section So I expect them to be FD fitment.They are sitting here doing nothing!..maybe trade for that deck?
They were Bought off the 3rd gen FS section So I expect them to be FD fitment.They are sitting here doing nothing!..maybe trade for that deck?
I'm sure you're aware that the FD comes stock with 550cc side feed primary injectors. In order to mount 850cc side feed injectors you will need to modify (mill out) the stock primary rail to accept the larger 850cc injectors.
If you're changing to a top feed injector than you'll obviously need a different rail for top feed injectors.
Either way I'd guess that, no, you won't be able to effectively mount 850cc injectors into the stock 550cc rail without modifications or completely changing rails.
If you're changing to a top feed injector than you'll obviously need a different rail for top feed injectors.
Either way I'd guess that, no, you won't be able to effectively mount 850cc injectors into the stock 550cc rail without modifications or completely changing rails.
Full Member
Joined: Nov 2011
Posts: 80
Likes: 0
From: Indonesia
I'm sure you're aware that the FD comes stock with 550cc side feed primary injectors. In order to mount 850cc side feed injectors you will need to modify (mill out) the stock primary rail to accept the larger 850cc injectors.
If you're changing to a top feed injector than you'll obviously need a different rail for top feed injectors.
Either way I'd guess that, no, you won't be able to effectively mount 850cc injectors into the stock 550cc rail without modifications or completely changing rails.
If you're changing to a top feed injector than you'll obviously need a different rail for top feed injectors.
Either way I'd guess that, no, you won't be able to effectively mount 850cc injectors into the stock 550cc rail without modifications or completely changing rails.
Btw I'm having the same set up, that's; 4 X 850cc injectors. You were saying that I should replace my primary fuel injector rails, am I right ? What else needed as I intend to buy everything down from a supplier. Please enlighten me, thanks.
David L
Full Member
Joined: Nov 2011
Posts: 80
Likes: 0
From: Indonesia
I'm sure you're aware that the FD comes stock with 550cc side feed primary injectors. In order to mount 850cc side feed injectors you will need to modify (mill out) the stock primary rail to accept the larger 850cc injectors.
If you're changing to a top feed injector than you'll obviously need a different rail for top feed injectors.
Either way I'd guess that, no, you won't be able to effectively mount 850cc injectors into the stock 550cc rail without modifications or completely changing rails.
If you're changing to a top feed injector than you'll obviously need a different rail for top feed injectors.
Either way I'd guess that, no, you won't be able to effectively mount 850cc injectors into the stock 550cc rail without modifications or completely changing rails.
Please advice, thanks.
David L
David,
What you have pictured is the FFE primary fuel rail, made by Full Function Engineering. That is an EXCELLENT fuel rail (I'm using the FFE Primary and Secondary fuel rails myself) that will fit top feed injectors.
The factory primary fuel rail will NOT accept top feed injectors, as it is made for side feed injectors. Here is a picture I found of the factory primary fuel rail.
What you have pictured is the FFE primary fuel rail, made by Full Function Engineering. That is an EXCELLENT fuel rail (I'm using the FFE Primary and Secondary fuel rails myself) that will fit top feed injectors.
The factory primary fuel rail will NOT accept top feed injectors, as it is made for side feed injectors. Here is a picture I found of the factory primary fuel rail.
