RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   Will 1st-gen 5-speed fit 2nd gen? (https://www.rx7club.com/general-rotary-tech-support-11/will-1st-gen-5-speed-fit-2nd-gen-730851/)

Tha Driver 02-16-08 02:07 PM

Will 1st-gen 5-speed fit 2nd gen?
 
Hi all,
I have an '85 which I'm parting out. a Friend needs a trans in his 2nd gen (year unknown - can find out if it matters). Will it fit/bolt in with no mods?
Thanks,
~ Paul
aka "Tha Driver"

Project84 02-16-08 04:36 PM

The transmission will fit but you need to remove the tailshaft housing from the '85 trans and install the 2nd gen trans tailshaft housing on the '85 gearbox. Clear as mud?

Go to this site and check out the info http://mrmazda.no-ip.com/interchange.html#TBPATTERN

Tha Driver 02-16-08 06:17 PM


Originally Posted by Project84 (Post 7874685)
The transmission will fit but you need to remove the tailshaft housing from the '85 trans and install the 2nd gen trans tailshaft housing on the '85 gearbox. Clear as mud?

Go to this site and check out the info http://mrmazda.no-ip.com/interchange.html#TBPATTERN

You're solution is clear but the page you referred me to is a little muddy. :-)

I feel the same way about having to listen to freakin' SPANISH before I can even get to a list of buttons to press for options! LET THE DAMN ILLEGALS LEARN ENGLISH!
Thanks,
~ Paul
aka "Tha Driver"

Rx-7Doctor 02-16-08 07:01 PM

You can only swap the tail shaft over if it is a S4 N/A transmission. Meaning that his 2nd gen is a 86-88 Non-turbo vehicle. The FB tail shaft housing will not fit on the S5 transmissions.

Tha Driver 02-16-08 11:21 PM


Originally Posted by rx7doctor (Post 7875118)
You can only swap the tail shaft over if it is a S4 N/A transmission. Meaning that his 2nd gen is a 86-88 Non-turbo vehicle. The FB tail shaft housing will not fit on the S5 transmissions.

I know it's a non-turbo. I'll let him know tomorrow & find out more info on it.
Thanks,
~ Paul
aka "Tha Driver"

Tha Driver 03-11-08 08:24 PM

Turned out his vibration was in the driveshaft, not the trans. Don't know why he didn't notice that when he put the clutch in....
Anyway thanks again for the help, guys. Trans is available if anyone wants it for $75.
~ Paul
aka "Tha Driver"

Hayt 03-18-08 05:51 PM


Originally Posted by Tha Driver (Post 7967322)
Trans is available if anyone wants it for $75.
~ Paul

Paul - I'm interested in this transmission. Unfortunately, my posts are less than 10 = I can't PM you here. Please PM me and I will be able to reply (at least I'd guess). I'm located in SC.

Thanks in advance.

Jason

Tha Driver 03-18-08 06:21 PM


Originally Posted by Hayt (Post 7992474)
Paul - I'm interested in this transmission. Unfortunately, my posts are less than 10 = I can't PM you here. Please PM me and I will be able to reply (at least I'd guess). I'm located in SC.

Thanks in advance.

Jason

I don't see any way to PM folks. Maybe I don't have enough posts either, or the link just dosen't show in Opera. :wallbash:
You can email me at ImThaDriver at yahoo.
Thanks,
~ Paul
aka "Tha Driver"


All times are GMT -5. The time now is 05:57 AM.


© 2024 MH Sub I, LLC dba Internet Brands