RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   On Swap do i have to rebuild (https://www.rx7club.com/general-rotary-tech-support-11/swap-do-i-have-rebuild-181685/)

Sojin 04-30-03 09:57 AM

On Swap do i have to rebuild
 
im doing a N/A to a Turbo ll in my 87 rx-7 and i have the motor but no money to do a rebuild? Help me

Cosmo Donk 04-30-03 10:35 AM

Does it NEED a rebuild? If it does, then there is nothing we can do because most of us have no money either:)

Sojin 04-30-03 10:56 AM

im asking dose it because i want to have fun with may car and i just blow a seal on my old motor

Cosmo Donk 04-30-03 12:05 PM

Huh?

If you are asking us if it needs a rebuild you are asking the wrong question because there is no way we can tell you that.

Sojin 04-30-03 05:35 PM

CAN YOU TELL ME HOW I MITE TELL IF I NEED TO BE REBUILD.

jgrts20 04-30-03 07:47 PM

well for starters, does it smoke(black) and does it run like sh*t? then u go from there!! :p

otherwise u can buy a bolt on turbo and replace the exhaust for a turbo!! PEACE man and good luck!!

Sojin 05-01-03 10:03 AM

THE THING IS THAT THE MOTOR IS OUT AND ITS A j-SPEC WITH ONLY 20K

Cosmo Donk 05-01-03 11:25 AM

Do a compression check. If the motor is not in the car and cannot be tested with a compression checker there is no way to correctly test it.

You can get an idea by turning the engine by hand with the spark plugs out and listen to the compression pulses. You should hear 3 solid swooshes out each rotor.


All times are GMT -5. The time now is 01:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands