RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   Stock FD. What mods/how? (https://www.rx7club.com/general-rotary-tech-support-11/stock-fd-what-mods-how-244801/)

CSSMIKETSI 11-23-03 01:23 AM

Stock FD. What mods/how?
 
Ok.... Just bought a 93 RX7 with a BOV and Exhaust. 103,000 miles on it and a original motor. What mods can be done without risking longevity too much? How much boost is safe?

Black97VR4 11-27-03 03:36 PM

A radiator would be pretty good mod. ;)

But you could get away with an intake, intercooler, vac hose job, and maybe a downpipe. After that you need a computer to ensure adequate fuel.

SkywarpR 11-28-03 06:42 PM

The first mods I did were an M2 AST elimination kit, zip tied the vac hoses, and a Mazda Comp Radiator. Reliability is key, especially if you have 103k on the cars first engine.

RotaryMagic 12-03-03 07:20 PM

Wasn't this the same guy that flamed Rx-7s after posting his kill about how his dsm beat one. yeah you need to focus mostly on reliability mods first. CWR dual oil coolers etc etc. AST.

RE13REW 12-04-03 06:17 PM

Up to you..... Intake, downpipe and midpepe

1stand3rd 12-05-03 05:32 AM

103K on the original motor? Compression check, drive it until the motor blows, then worry about mods.

mazdaspeed00 12-05-03 05:40 AM


Originally posted by 1stand3rd
103K on the original motor? Compression check, drive it until the motor blows, then worry about mods.
i would do the same thing. i would not worry about any reliability mods or silicon vaccum hoses. just save your money for when the time comes.


All times are GMT -5. The time now is 11:37 PM.


© 2024 MH Sub I, LLC dba Internet Brands