General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

startup problem

Thread Tools
 
Search this Thread
 
Old Jun 24, 2006 | 10:19 AM
  #1  
krazyk's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: May 2006
Posts: 11
Likes: 0
From: tampa, fl
startup problem

i was approching a redlight the other day, and since i got my car it's always kind of bogged when coming to dead stop. this time though, it stalled. i tried starting it and nothing, just cranked and cranked. i cut the fuel pump (manual switch), cranked it for a few seconds, then tried to turn the fuel back on, nothing. tried push starting it a few times, still nothing. long story short, i've tried everything i can think of, and got nothing. could the manual switch have fried my fuel pump? any suggestions would be appreciated
Reply
Old Jun 24, 2006 | 07:27 PM
  #2  
sleepydave's Avatar
i heart drag radials
Tenured Member 05 Years
 
Joined: Mar 2006
Posts: 272
Likes: 0
From: ye olde hampshire
um, this may be a long shot, but how is your starter doing? any issues cranking it up?
check the voltage at the pump, if its within spec then you are fine there.
Reply
Old Jun 26, 2006 | 02:36 PM
  #3  
krazyk's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: May 2006
Posts: 11
Likes: 0
From: tampa, fl
thx, i'll try the pump voltage. my starter is fine
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
Sep 28, 2015 10:32 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 10:00 AM.