RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   se cold start problem (https://www.rx7club.com/general-rotary-tech-support-11/se-cold-start-problem-154111/)

jeremy 01-31-03 03:02 PM

se cold start problem
 
when starting the car after sitting for a while, the cold start will take kick the tach to almost 5k stay there for 1-3 minutes instead of the 30sec or so it should then drop down around 2k and start jumping, 2k-4k. it will continue to cycle like this for up to 15 minutes. i've found the only wy to get it to stop is fight it to hold a steady rpm with my foot. once i do that it will drop to its normal idle.


tried this in the first gen section but it keeps sinking without any responses.

XtremeRX 02-04-03 07:34 AM

so it's a first gen, meaning it's carburated correct? if so i had a simular problem with my old 83 olds, with the biggest piece of crap carberater ever created (quadrajet) it'd do that for me alot untill i cleaned it out and put a carb kit in it... that might help ya...
good luck!
peace

jeremy 02-04-03 11:57 AM

se's were the 84-85 fuel injected 13b versions. problem was solved though. somewhat. thanks anyway.;)


All times are GMT -5. The time now is 09:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands