Running Issue 1981
Just started with RX-7's and I love working on it. Currently doing some body work and repairing some rust issues under the storage compartment and the seal area around the rear glass.
Anyway I noticed that the previous owner had the chocked pulled out and blocked so it would not fully close. I removed the spacer and it would skip on acceleration and backfire bad on decel. Pull the choke and it stops. I assume I need a carb rebuild. What area of the carb would cause this? I think I will replace all of the vaccum lines and take off all emmission's parts and remove the rats nest. |
start checking for vacuum leaks. there may be a small one somewhere in there.
another scenario is he/she messed with the carburetor and it's now running lean, then they started using the choke to richen it as a Band-Aid. get a copy of the FSM and start troubleshooting the carburetor. follow the procedures to start adjusting fuel/air mixtures from scratch. |
Please document your bin repair also
|
All times are GMT -5. The time now is 08:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands