RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   Rpm and clutch question. (https://www.rx7club.com/general-rotary-tech-support-11/rpm-clutch-question-476935/)

KeloidJonesJr. 10-28-05 09:43 PM

Rpm and clutch question.
 
Not really sure what section this belongs in but here goes. This happens when the car is moving or when shifting gears. Whenver I press on the clutch, the RPM goes up a little about 300 RPM before it goes down so I can shift gears or what not.I understand usually you press on the clutch the RPM always goes down, (in the other cars I that driven atleast) My question is: is it normal? And if it isn't, how do I correct this?

MazdaTed 10-28-05 10:23 PM

Are you still pressing the gas while you push the clutch?

KeloidJonesJr. 10-28-05 11:05 PM

Never

KeloidJonesJr. 10-29-05 02:48 AM

anyone?

jl_rotary 11-15-05 08:54 AM

possible that the throttle cable is sticking alittle?

HAI-TEK7 11-15-05 08:59 AM


Originally Posted by jl_rotary
possible that the throttle cable is sticking alittle?

my thoughts also

s3art 11-21-05 04:39 PM

might this be when you press the clutch you're actually taking the load off the engine/tranny, therefore ..rpm jumps a little ?

dsm.who 11-22-05 09:46 AM

i have heard that a lightweight flywheel will cause the rpms to continue revving alittle during shifts, is that true?

just what i heard

GodSquadMandrake 11-22-05 09:48 AM

It really sounds like a vacuum leak to me. Does it have problems idling or cold startups?


All times are GMT -5. The time now is 07:07 AM.


© 2024 MH Sub I, LLC dba Internet Brands