General Rotary Tech Support Use this forum for tech questions not specific to a certain model year
Sponsored by:
Sponsored by: CARiD

Problem!

Thread Tools
 
Search this Thread
 
Old Jun 11, 2010 | 08:32 AM
  #1  
ARotary14's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Jan 2010
Posts: 83
Likes: 0
From: Houston TX
TX Problem!

Ok here is the deal,

I have a 87 RX7 TII it is running better than ever!! Until yesterday when the efan stopped working for about a mile. The car never over heated or even ran past mid way on the gauge. So this morning I go to start it nothing..... turn the kill switch for the fuel pump nothing..... Try again and I hear the walbro then I hear what sounds like the injectors spraying into the engine.... I cant figure it out.
Any help will be usefull,

Mods just in case you need to know..
KOYO w/efan (efan runs on a kill switch)
Sniper Racing FMIC
Racing Beat FDC
XS Boost Controler
XS 3" turbo back exhaust
MSD
ACT 6puck
Walbro 255 w/kill switch
550cc
S5 turbo
Reply
Old Jun 11, 2010 | 08:34 AM
  #2  
ARotary14's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Jan 2010
Posts: 83
Likes: 0
From: Houston TX
PM me, answer on here, or text me @ 501-231-8350
Reply
Old Jun 11, 2010 | 01:05 PM
  #3  
ARotary14's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Jan 2010
Posts: 83
Likes: 0
From: Houston TX
Is it a spark issue??? Should I check my plugs
Reply
Old Jun 14, 2010 | 10:05 PM
  #4  
ARotary14's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Jan 2010
Posts: 83
Likes: 0
From: Houston TX
Ok I replaced my plugs nothing.... I hooked up the old plugs to the wires and laided them on the windshild and turned the car over NO SPARK!!
what do I need to check??? any help would be awesome!!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WyomingTII
2nd Generation Specific (1986-1992)
12
Sep 28, 2015 10:32 AM
lnlreaper
2nd Generation Specific (1986-1992)
2
Sep 27, 2015 09:59 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM




All times are GMT -5. The time now is 08:49 AM.