Must Wait To Start 2-4 hrs
Ok, So here it goes. My 93 FD3S I just replaced the engine in it But before i did I had somone do a compression test every since they took out the plugs, The car won't start everytime it takes 2-4 hours to start the car again you have to not turn the key at all for 2+ hours i was wondering if anybody has had that happen to them before or could know what it is car runs like a champ just getting it to run when i want is the problem Thanks =) |
sounds like a issue I had. Upon disassembly of the engine I found out I had bad side seal springs. Just a thought.
|
heres a few
dirty injectors leaking fuel and it floods out. apex seals to tight in groove and get stuck when they heat up(more of a problem with after market seals) |
How does doing a compression test before the rebuild relate to the current issue? Do a compression test, sounds like you have low compression which makes hot starts terribly difficult.
|
Well it has started Not acting Up Now idk wtf it was but it will probably happen again i have alot of system stuff and My wire harness looks like a ball of yarn so im rewiring the whole car i believe it may be a bad ground
|
All times are GMT -5. The time now is 10:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands