Lo Z injectors to high Z injectors HELP!
 

https://cimg9.ibsrv.net/gimg/www.rx7...e1d43e57fe.pngNow i tried just cutting the resistor box out (why theres a black loop). No bueno. Car started on a bump but ran so rich and bad, on starter fluid and some fuel, but when i threw the pump on,it killed it. Any ideas on how to properly delete this so i can run my high Z injectors?


Ok, started with Lo impedance 550's. Replaced with two Hi impedance 550's, and two Hi 850's.

I understand the resistor box needs to go, but HOW?! mine isnt the yellow plug either with 5 pins. I have a white, round, one tab plug with 6 pins....Two go to the resistor box, 4 go to a relay which I think is the pump. Car is an 88 t2. What do i do? Can't find a writeup on this anywhere?

@satch

Open resistor box. Replace every resistor with a piece of wire. Done. :)