RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   General Rotary Tech Support (https://www.rx7club.com/general-rotary-tech-support-11/)
-   -   just finished vac hose job, now boost spiking fixed? (https://www.rx7club.com/general-rotary-tech-support-11/just-finished-vac-hose-job-now-boost-spiking-fixed-61536/)

TainoIndian 03-13-02 01:00 PM

just finished vac hose job, now boost spiking fixed?
 
i recently finished my vac hose job ( replaced all check valves and 3 solenoids 2 broken 1 malfunctioning one ) about week and half ago....car is sooo smooth but whats strange is i dont get anymore boost spiking to 14-15psi? i used to spike if at WOT and my boost was erradic and felt stumbley my mods are bonez high flo mid pipe, and bonez downpipe with new air filter stock replacement. my boost is now a perfect for me 11-9-11 at WOT i used to get something like 5-5-15! ouch!!! i am puzzled because i though vac hose job was going to give me more boost that i was loosing through leaks? AND ALSO THE Y-PIPE WAS GOING TO INCREASE BOOST? how is this so......good news is the ecu

it was fun experience working on the vac lines i think everyone who ones a FD should do it i learned alot about how the turbo works and the car itself......:cool:

piston pounder 03-13-02 01:33 PM

Great to hear its working awesome!, you in for going to denver friday?, poss. saturday if its snowing again!

peejay 03-14-02 05:23 AM

The boost spiking/erratic boost control was probably caused by old, cracked hoses and crackes solenoids not sending the correct signals to the actuators.

vacuum hoses are generally too small to cause a major loss-of-boost problem unless you grab a handful of them and yank them off entirely.


All times are GMT -5. The time now is 06:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands