jdm s5 turbo 2 not starting?!!! PLEASE HELP!
ok so i have an 88 gxl that i gutted and replaced ALL the wiring with s5 wiring and then dropped in a JDM S5 Turbo2 engine , i havent checked compression yet but i do here the typical whoosh ,,, whoosh ,,, whooosh sounds when i crank it ,
if someone could call me i can explain it soooo much better or pm me your number and i will call you ! THanks alot! Will H. 216-702-3973 |
bump still needing some help here!
|
Are you running the S5 Metering Oil Pump? Check it and everything that goes to it very carefully. If the S5 computer is not reading a signal somewhere It will not run. Or if you still have an S4 MOP on there.
|
Pay someone or a shop who is competent to do the work.
-Ted |
Originally Posted by RW-7
(Post 8110414)
Are you running the S5 Metering Oil Pump? Check it and everything that goes to it very carefully. If the S5 computer is not reading a signal somewhere It will not run. Or if you still have an S4 MOP on there.
is it true that if the AFM is not working it wont , it wont spark? friend locally who has a t2 jdm told me that ??? |
nevermind the electrical part of my car ... the front rotor has NO compression so a rebuild is in my immediate future .
|
well turned out to be low compression engine so i dropped in another and YIPPEEEE it fired right up ... but still dies if i dont keep it at 2k rpm or feather the gas pedal??? any reason this is doing this? i have a whole spare engine for parts but i would like to know what would cause this
please somebody with over 1 years exp. with turbo rotories please give any advice! thanks |
ok im really stumped now ANYONE I DONT CARE WHO PLEASE HELP!!!
|
Nevermind i am a god apparently , cause i fixed it! lol was a simple hidden vacuum leak in the inlet tube betweed the AFM and Turbo inlet . lol
and i found other small things i didnt see b4 but nothing to major |
All times are GMT -5. The time now is 12:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands