Issues
Replaced the wiring harness as the car would seem to drop a rotor and the harness was old.
The car seems to have issues after driving it for ~ 30 minutes; symptoms are 1) Stalls when pulling up to a light 2) When engaging the clutch, it will stall immediately unless you raise the RPM to ~ 2k & SLOWLY engage the clutch while keeping RPMs high 3) Backfires when taken out of gear - excessively 4) Seems to buck a little when engaging 1st to 2nd, or from 2nd to 3rd PFC, BNR twins, new 550's and cleaned and flowed 1300's. Stealth 340 pump. |
my thought: check with the timing and connections at the crank sensors.
|
Originally Posted by diabolical1
(Post 11685698)
my thought: check with the timing and connections at the crank sensors.
The car runs fine for 30 minutes, then the problems exhibit themselves. |
All times are GMT -5. The time now is 09:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands