|
Whats my end play??
H E L P!
My end play seem to be too loose if i am reading it correctly, it looks to be .0076 and my spacer looks to be a C. If the end play is less than specified, replace spacer with a thicker one. if the end play is more than specified install a thinner spacer.. A = 7.975 - 7.995 mm (0.3140 - 0.3147 in) B = 7.995 - 8.015 mm (0.3148 - 0.3155 in) C = 8.015 - 8.035 mm (0.3156 - 0.3163 in) D = 8.035 - 8.055 mm (0.3164 - 0.3171 in) E = 8.055 - 8.075 mm (0.3172 - 0.3179 in) End play needs to be between 0.040 - 0.070 mm (0.0016 - 0.0027 in) Respectfully request help selecting correct spacer thank youhttps://cimg1.ibsrv.net/gimg/www.rx7...c58baf1933.jpg https://cimg6.ibsrv.net/gimg/www.rx7...2b60da3504.jpg https://cimg7.ibsrv.net/gimg/www.rx7...7bcb31f4e0.jpg |
Maybe stick with what you’ve got, but replace the Torrington bearings and put a dab of lube in there. Sometimes new bearings will give you a few tenths of a mm due to old ones being wore down. just re-read and noticed it is an inch gauge, correct? Make sure you’re not missing something in the stack. 0.0049” is a lot of play. |
| All times are GMT -5. The time now is 01:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands