Check valve
 

I own an 86 rx7 non turbo and i broke a check valve when changing one of my injectors. what type of check valve is this? do i need a certain kind or can i pick up a universal. im assuming its one way. but ive havnt had the car for very long so this is all i can figure out.

http://i48.tinypic.com/23vzy1u.jpg

i broke the connector on the side of it. Help is very much appreciated.

Thanks.

The vacuum hose runs to the Double Throttle Diaphragm which is used to hold the secondary plates closed when the engine was in the process of warming up. So, there was vacuum in the hose after a cold start and this vacuum would pull close the secondary plates until the vacuum disappeared and the plates would be allowed to open up. Mazdatrix sells the item, but you could also cap the hose and not rely on the throttle diaphragm since most don't work after all these years and you could let your throttle foot do the same job of the diaphragm by keeping the throttle low until the engine is sufficiently warmed up.

Mazdatrix part #13-995A-N390 $35.02 (holy crap!)

Thanks alot you guys. The price is stupid for such a part but that's the least of my concerns lol.

Put Up a Want To Buy Thread in Parts.
Guys have tons of this little stuff hangin around,and you could probably get it for 2 bucks.
I got 3 throttle bodies here with that thing on it.But I am in Canada.

Yea I was thinking about doing that today, ill probably buy a few of someone has multiples, they seem to be pretty brittle. Mine cracked like it was nothing all I did was push on the tube.