ALS apex seals
Does anyone have experience with als apex seals? They say they are unbreakable but I dont belive in that. If/when they brake, do they damage the engine? How do they handle heat, etc?
|
Are they one piece or two piece ? Thanks
|
Two
|
Originally Posted by 13B-RX3
(Post 8682793)
Two
|
Originally Posted by 13BT_Starlet
(Post 8684905)
Thanks 13B , How mutch boost have you run on them ?I know tou had a really bad lean out and it didn't even bend.
|
Originally Posted by 13B-RX3
(Post 8684911)
About 25 is all i have subjected them to. I hope that will change shortly :)
|
Has anyone got a long term-ish report on these seals? Even just a tear down report after 20-30K miles? Which would give a pretty good indication on how these seals would last in the long term.
I'm leaning towards using these for my next 20B motor... |
Bump, I'm curious about these as well
|
THERE IN MY Car THE rotor cracked but the car still starts & runs. apex seal still in tact!
BTW we took the apex seal and bend it to make a v shape, bend it back, then took it and put it into a car and start it! one of the best things ever to happen to my car oh and they have been in the car since march of last year. and i run the car hard every week at the races. |
Originally Posted by darkphantom
(Post 8956219)
THERE IN MY Car THE rotor cracked but the car still starts & runs. apex seal still in tact!
BTW we took the apex seal and bend it to make a v shape, bend it back, then took it and put it into a car and start it! one of the best things ever to happen to my car oh and they have been in the car since march of last year. and i run the car hard every week at the races. |
The seals in this motor http://www.youtube.com/watch?v=Nagu18i1mcI came out of my old motor that i literally split the rear iron in two after a severe detonation!!! Still running strong! I am a believer!
|
Originally Posted by mono4lamar
(Post 8956551)
I hope you're exaggerating! I don't see how you could possibly bend metal then bend it back perfectly without it stretching or even marring the surfaces...
and the other ones he bend it back and put it back in the car (the ones that blew) |
I have heard a lot of high HP cars run them for long periods of time with no problems coming from the seals. I will be using them in my rebuild after seeing 900hp 20b pickup run em for a year.
|
+1 in mine for 2-3k miles so far. Final tune in 2 weeks.
|
Originally Posted by 13B-RX3
(Post 8956698)
The seals in this motor http://www.youtube.com/watch?v=Nagu18i1mcI came out of my old motor that i literally split the rear iron in two after a severe detonation!!! Still running strong! I am a believer!
Allen, you reused the SAME seals that were in the motor that cracked the plate? as the same 6 seals that withstood the detonation? or a new set of the same brand of seals? |
THE same seals. That motor cracked the rear plate, dented both rotors, killed the side seals, killed the corner seals, and killed the bearings. I replaces the apex seal springs and used the same set of seals over again. They were straight as an arrow!
|
^ dam
I would think they would be junk. I am glad to see they held up |
they dont break, whats not to understand about that, my rotor is cracked cause we didnt use the s4 rotors and its still running
|
we talking about the 2mm right? if so i'm getting me a pair a asap... i beat on my car a lot and then feel guilty, i need some peace of mind... are they $450 a peace??
|
Yes, mine are 2mm. Make sure to tell Edgar that Allen sent you :icon_tup:
Thats for the set, i know, cheap huh! |
i'm sold... i run denatured alcohol(not tune for it)... premix on top of the stock OMP... blah blah blah.. this will feel like dumping a big load...
|
Uhhh, whats the alcohol for?
|
its a cool mist kit, spraying 100% denatured alcohol(with some 2 stroke oil for the pump)... I just spray it to prevent detonations, the car is not tuned for more power out of it. i got traumatized when i bought a TII with "10K" that didn't even last me a month... i even swapped an sr20 into that FC... I got an FD now with 310whp on the stock non-seq twins, love the 13b so much i try to keep it running. going to street port, and rebuild on this seals before i blow and have to pay even more.
|
OK, i got ya!
|
The seals are back ordered for about 3 more weeks. I have 6-7 sets coming from Edgar when they are ready. So far, nothing but great things to say about these seals.
|
All times are GMT -5. The time now is 10:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands