Fuel rails
I have a 13B-REW but am running the Cosmo upper & lower intake manifold. I just went to your website but could not pull up any product lists.
I was wondering if you have a secondary rail for the Cosmo manifold? If you do not, will your primary rail clear/fit for use with the kg parts secondary rail (I am currently running a kg parts primary w/ID 2000's, & a kg parts Cosmo secondary w/ Bosch 1680's). At a minimum I would really like to use your primary rail w/ my ID2000's as I am sick and tired of the junk kg parts primary and all the leaking issues. I appreciate your time and help, Alex aka AFAwaterpolo |
They do have a Cosmo secondary rail, and the primary rail is the same as the FD rail, I believe their page is down at the moment.
|
Originally Posted by FC3S1991
(Post 11445573)
They do have a Cosmo secondary rail, and the primary rail is the same as the FD rail, I believe their page is down at the moment.
Thanks for info. |
Sorry for the delayed response, We weren't aware we had a subforum!
Anyways if you haven't been able to find it yet here's the address Thanks! 13B-RE Rail Set | Full Function Engineering |
I have a cosmo 13b and i am looking at ordering fuel rails and injectors. what is the difference in using the 48 or 60mm injectors?
I have a haltech ps2000 and will be running pump gas with t51 around 1 bar are the id 2000 injectos controllable enough to run them in primary? |
RZ20B,
The size is so that we can ensure correct fitment for your application. We have customers running ID2000's as primaries on large street ports on E85 with great results (at 3 bar base pressure). For small ports and gasoline the ID1000 or ID1300 is a better choice if possible. Thanks! |
All times are GMT -5. The time now is 07:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands