RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   FDNewbie Imports (https://www.rx7club.com/fdnewbie-imports-172/)
-   -   GB: SakeBomb Garage Stainless Steel Brake Line Set (https://www.rx7club.com/fdnewbie-imports-172/gb-sakebomb-garage-stainless-steel-brake-line-set-851449/)

RotorMotor 07-13-09 02:43 AM

GB: SakeBomb Garage Stainless Steel Brake Line Set
 
SakeBomb Garage in conjunction with FDNewbie Imports, is pleased to Offer:
Our very own (affordable) DOT approved, Stainless Steel, Clear Sheathed, Brake Line Kit!




DESCRIPTION:
Get the most out of your brake system by replacing your worn out rubber lines. Rubber lines (especially old ones) expand outward during braking causing an increase in required pedal travel, and a spongy feel (the last thing anyone wants when trying to quickly modulate brakes). As most of you know, the solution is replacing the flexible rubber lines with SS wrapped teflon lines. Many aftermarket brake line kits use a BARE SS wrap which allows dirt particles become embedded and degrade the line. Our lines come sheathed with a clear durable protective coating to ensure the longevity of this brake line kit... not to mention keep them looking clean ;)


HIGHLIGHTS:
  • OEM Fit
  • DOT approved
  • Clear Coated/Sheathed
  • Cost significantly less than the competition
  • Use the highest quality fittings and lines
  • Comes with new Banjo bolts and crush washers
  • All lines are pressure tested before being shipped to ensure absolute safety.


About us: As some of you may know, SakeBomb Garage is small... very small. Where some companies are forced to cut corners on the product to shave costs, being small allows us the luxury to keep prices lower than the competition while still retaining the highest build quality. When I ordered a set of Goodridge lines for my 20b FD, I was surprized to find a lack of a clear sheath/coating to prevent dirt from deteriorating the lines, and also very minimal material for strain relief between the fittings and the hose. All of this at a price that was anything but cheap... so we decided to build our own. Dan and I both love them on our cars so we decided to make them available to the FD community :)


Here is a comparison shot of SakeBomb Garage V.S. Goodridge. We don't have fancy red caps or name tags, but I think you can see why we feel our kit is superior!

http://i723.photobucket.com/albums/w...BrakeLines.jpg


GB Pricing:Standard pricing for these lines will be $105. This is significantly lower than most of the competition while using much higher quality components, and are clear coated to boot! While they are already priced as low as possible we want to do better.If we can reach at least 15 sets, we can get the price down to $95 each! 25 sets and we can the price down to $85!! Shipping will be a flat rate of $7 for each kit. Yes, we are happy to combine shipping with any of our other products :)


Reserve Your Spot! As the GB price depends on the amount of orders, we will deal with processing orders/collecting money at the CLOSE of the GB. PLEASE DO NOT
ADD YOUR NAME TO THE GB LIST IF YOU DO NOT INTEND TO PURCHASE LINES! This is not only for our sake, but the rest of the people in the GB. We need accurate numbers... otherwise, we can't reach the discounted prices listed above. Again, please only add your name if you intend to purchase.

Thank you!
Heath and Dan
SakeBomb Garage


1.
2.
3.

Scrub 07-14-09 11:20 PM

no hits so far huh....Maybe we should get this posted in the GB section.

RotorMotor 07-17-09 12:11 PM

No interest? No questions? Nothin? :D I thought these would sell like hotcakes considering how close to cost we have gotten the price down to :sad:

HobbeZ 07-17-09 10:10 PM

i'd be interested, how long do you plan on having the group buy run?

Miata_mx5 07-17-09 10:32 PM

Make a kit for one particular silver R32 GT-R. I am down to get it :D

spr258 07-17-09 11:53 PM

Where do they have info on all the items they sell at SakeBomb Garage? Do they have a web page?



1. SPR258
2.
3.
4.
5.

FDSeoul 07-18-09 02:06 AM


Originally Posted by Miata_mx5 (Post 9365226)
Make a kit for one particular silver R32 GT-R. I am down to get it :D

Dude G man you can afford to buy your shit at the regular price man, we FD guys are broke and always in need for special GB.

You drive a Skyline you can afford to pay the high rate stuff.

RotorMotor 07-18-09 03:29 PM


Originally Posted by Miata_mx5 (Post 9365226)
Make a kit for one particular silver R32 GT-R. I am down to get it :D

Ganesh, send me your old ones and we can make a kit. ;)

cabaynes 07-18-09 03:31 PM


Originally Posted by FDSeoul (Post 9365550)

You drive a Skyline you can afford to pay the high rate stuff.

:lol::lol::lol:

RotorMotor 07-18-09 03:58 PM

HobbeZ: The length of the GB doesnt matter to us, we can end it when we reach either of the break points 15 or 25... that's up to you guys. Ultimately it will depend on, demand but I was hoping to not have it drag on more than a month or so.

If its slow we will end it at the first break point... if things look like they are picking up we can try to make the next one. After 25 the price doesnt go down, but if there are even more people signing up we might do something fun like a raffle for free shipping :)



spr258: We don't have a website at the moment. At this point 100% of our spare time is going into product development, but we hope to have one up in the future.



FDSeoul: This IS the highrate stuff LOL! :D

spr258 07-18-09 04:13 PM

What other products do you offer or is it just the oil cooler? What products are in development so we know what other things to look forward to?

RotorMotor 07-19-09 12:52 AM


Originally Posted by spr258 (Post 9366466)
What other products do you offer or is it just the oil cooler? What products are in development so we know what other things to look forward to?

We are currently working on a full on vmount kit, oil pan bolt GB, halon fire extinguisher mount, and a bunch of other parts I'm not at liberty to disclose at the moment ;)

FDSeoul 07-19-09 03:02 AM


Originally Posted by RotorMotor (Post 9367178)
We are currently working on a full on vmount kit, oil pan bolt GB, halon fire extinguisher mount, and a bunch of other parts I'm not at liberty to disclose at the moment ;)

NICE super Nice!!!!

Miata_mx5 07-19-09 01:02 PM

Pure porno!

Scrub 07-22-09 01:15 AM

it's not looking good. We need to get this posted in the GB section.

RotorMotor 07-31-09 12:16 AM

LOL wow.... im really surprised no one wants the SS lines... they really are better constructed than even goodridge! I was convinced we'd sell at LEAST 15-20 at these prices. you guys want them for free or something??? :D

I'll do FREE shipping for the first 5 people in the GB to get it going.

ROTARYFDTT 07-31-09 05:21 AM

hummmmmmm tempting, they look very nice guys.

Supernaut 07-31-09 08:01 AM

You know what, Im interested.

1. SPR258
2. Supernaut
3.
4.
5.

RotorMotor 08-02-09 09:00 PM

sunday bump. with these prices and free shipping for the first 5 people, my only thought is that no one can find this thread...

jknapik 08-03-09 11:05 AM

need new lines count me in

1. SPR258
2. Supernaut
3. jknapik
4.
5.

Scrub 08-03-09 05:37 PM

Nice....we're seeing a little growth.

RotorMotor 08-03-09 07:38 PM


Originally Posted by scrub (Post 9400955)
nice....we're seeing a little growth.

that's what she said

keister 08-06-09 05:36 PM

Soo..are the first five 105$ shipping included?

RotorMotor 08-06-09 09:42 PM


Originally Posted by keister (Post 9408784)
Soo..are the first five 105$ shipping included?

Well, we want to get it down to $85!! :D That's the goal but I realize it's going slowly. If we can get to 10 I'll personally buy the next 5 sets so we can make the cutoff for $95. Same with the next step @ $85... if we make it to 20 I'll personally buy enough to put us over the top. Honestly, we make close to NOTHING off these kits.... we just wanted to get high quality and affordable race lines out there to the FD community (and our name along with them!). The other stuff is overpriced and low quality!! I bought goodridge lines, they sucked, so Dan and I decided to make these.

Basically, I want to answer your question by saying... I wont hold you to anyting. If it falls apart then you're welcome to them at 105 (thats our standard price) but lets not even go there ;)

keister 08-07-09 03:48 PM

I'm in...

1. SPR258
2. Supernaut
3. jknapik
4. keister
5.


All times are GMT -5. The time now is 09:32 PM.


© 2024 MH Sub I, LLC dba Internet Brands