GB: RotaryExtreme FD3S Hood Damper Kit!
Yes, you read this right. FDNewbie Imports is collaborating with RotaryExtreme yet again to bring you another group buy on the super popular RotaryExtreme hood damper kit. See, at FDNewbie Imports, we're ALL about cooperation and collaboration - anything to help provide our customers with the best quality products!
Some info about the hood dampers: "The RotaryExtreme hood damper kit enables you to open the hood without the hood rod which interferes with some parts installation and some stock mount aftermarket intercoolers. The damper kit is designed to be installed without any permanent modification to your vehicle or the hood. There is no drilling or cutting involved. The installation can be done with simple hand tools in 15 min: bolt the CNC machined brackets onto the hood hinges, replace the fender M6 bolt with the custom ball stud provided, snap the hood dampers onto the ball studs and you are done! It can be used safely with either the stock hood or an aftermarket hood because the CNC machined brackets bolt onto the stock metal hood hinges, not the hood itself. The kit includes two dampers, two CNC machined aluminum brackets that are bolted onto the hinges of the hood, 4 ball stud accepters and 4 ball studs. Our aluminum CNC machined hinge brackets use both studs of the hood that they can be installed without worrying about the correct orientation, unlike other inferiorly designed damper kit." (Courtesy of RotaryExtreme). My target is 10+ orders to get this GB up and running. Pricing is $150/set, SHIPPED. Thanks! ~Ramy FDNewbie Imports 1. caredden 2. eo2am 3. Juiceh 4. Giampiero 5. Phantom_FD 6. Corusco 7. artowar 8. rx7twin 9. Noxlupus 10. wadejg 11. scrubolio 12. Chunky04 13. Stonewall7 14. cbf246 ? 15. Northern7 |
I'm in!
Didn't Rotary Extreme also make a damper kit for FCs? Any Possible GB for those? |
|
Are these damers for the stock hood or aftermarket? Chuck had two different sets IIRC.
|
I'm sure we can do either or. Just specify which one you need.
|
I am in............
|
i'm most likely in, whats the deadline? does this mean RE is back?
|
I'll prob wait a week or so, and close it once the number slows down (prob in a week or so). If there's further interest later on, I'll see if another batch/run can be done.
And no, RE isn't back. Why do you think I'm selling them? ;) |
Count Me In
|
Price seemed to double since I got mine from Chuck.
|
yea that seems kinda hi i agree. but do they come in any other color then black ?
|
I just did a little searching and I found the Tein FD hood dampers for alot less.. Rammy I think you may need to revise the pricing.
ihavetwins - The Tein dampers are green. :D |
Re: price, Chuck lists his at $155 on his website: http://www.rotaryextreme.com/hooddamper.html
The Tein's; a quick websearch for the CHEAPEST price I could find was $138 + $16 shipping. That's $154 total. I was asking $160 SHIPPED. Nonetheless, I don't mind beating that and revising the price to $150 SHIPPED. And if we get a good number of ppl to sign up and follow through w/ a deposit, I don't mind seeing if we can drop the price even a bit more. |
These are AWESOME. I've had these on my car for sometime and having nothing but great things to say about them. I've used them with 2 CF aftermarket hoods so far with no problems. Great product and great price. I paid 155 + shipping, just like Ramy mentioned only a year back. Good luck with the GB.
|
I'm in as well. If there are different types, I need the aftermarket. Thanks!!!
|
Thanks Riz :)
|
$150 sounds like a good price. I'll go in on whichever set works with Chuck's Knightsports carbon replica hood.
|
The teins were not made for aftermarket hoods I believe. That is atleast What i though I've read on their site somewhere. I know the reason Chuck came out with these was because they can be applied to aftermarket hoods. Also Who the hell wants green hood struts!?
|
Dam you Ramy you are killing my credit card!
am in |
:iwstupid:
You might as well keep my CC info on hand... :icon16: Count me in. |
did you get my pm ramy?
|
Everyone's been added to the list thus far.
JIC, yea I got it. I'm working on it. I'll get back to ya ASAP. Don't worry. |
Ramy, has set me up to take over the GB once we get 10 interested. I'll take information and payments once we get there.
|
are these still gonig to be made after the GB is over?
|
Put my name in.
I just tried a set of the ones from ebay and they were just not nice pieces, for a number of reasons. Thanks, Justin Wade |
Jason, we just hit the 10 mark ;)
Justin, you're very welcome :) scrubolio, no they will not. Chuck of RotaryExtreme is done w/ the car scene/business. This was a special arrangement I had going w/ him; it's highly unlikely this will be offered again. In other words, you snooze...you lose ;) ~Ramy |
well you said the magic words, i'm in!
|
so when are opening up for down payments
|
I am in...Just let me know who to paypal and when... :ylsuper:
Thanks, Shawn |
I'm in. If there is a difference I will take the one for the aftermarket hood.
Thanks - Neil Stonewall7 |
Looks like it's time to get this thing rolling...
If you wish to participate in the GB I will need the following information sent to me (BlueRex) via PM: 1) Your forum username 2) Your real name 3) Your shipping address 4) Your payment method (paypal will have to pay the extra 3.5%) 5) Whether you have a stock or aftermarket hood Payment info: I'll accept Cashiers Check, Money Order, and Paypal. Paypal is preferred since it is instant and safe. ***Please be aware, I will not be responsible for lost or stolen MO/CC. Price is for MO/CC = $150.00 shipped Price for paypal is $150 + 3.5% = $155.44 shipped Address: Jason Sattar 271 Tarocco Irvine, CA 92618 Paypal address: bladesoxy2@yahoo.com I will post payments received, normally once a day, as I receive them. |
I liked the $125 price better..
|
Originally Posted by Stonewall7
I liked the $125 price better..
|
pm sent
|
PM'd & paid.
|
cbf246, you haven't signed up yet, correct? Please make sure you post that you're signing up prior to PMing Jason and paying. I wanna make sure we keep the list in the 1st post updated.
Thanks ~Ramy |
Payment coming tonight! Sending pm
|
What's the difference between the stock and aftermarket hood? (Not the actual hoods, but the kit; is it just the dampeners?)?
|
i dont know how much of a difference its gonna make but when i ordered my CF N1 hood from Chuck i also ordered hood dampers, so he made me a custom hood damper set that wasnt too harsh for the hood.
with that said, the quality of the kit looks better and more durable then any TEIN kit that i've seen. granted ive only seen the TEIN kit on a STi and a Civic, but it looks flimsier then my Rotary Extreme damper kit. sidenote- ramy, what kind of tow hooks can you get? was it FEED? and are they strong enough to actually be used on the track? |
I saw an FD with the Tein dampers last week and got to play with the hood a bit. It did not seem flimsy at all. However, the brackets that bolt to the hood hinges didn't look as heavy duty as the Rotary Extreme ones. For that reason alone I would buy the Rotary Extreme kit over the Tein.
Also, the Tein green doesn't go with every color scheme. Black, however, can work with just about any color scheme. I will send a PM and payment info tonight. |
Guys, it should be of no surprise; Chuck's parts are always of the *highest* quality...
ZumspdRX-7, there are a few diff companies that make heavy duty tow hooks, but the FEED ones sure are heavy duty... They're heavy as heck too. ~Ramy |
My list:
cbf246 wadejg - PAID artowar - PAID Northern7 Noxlupus Please don't send me your info if you don't plan on following through with the GB, it's just a waste of time for both of us. I also keep track of flakers for all of Ramy's GBs so you may get "black listed." :evilgrin: Ramy, edit this info in however you want. |
i want 4 sets please is that ok?
|
Whoops...edited the wrong post hehe
Originally Posted by BlueRex
My list:
cbf246 wadejg - PAID artowar - PAID Northern7 Noxlupus Please don't send me your info if you don't plan on following through with the GB, it's just a waste of time for both of us. I also keep track of flakers for all of Ramy's GBs so you may get "black listed." :evilgrin: Ramy, edit this info in however you want. Thanks Giampiero,ready to pay. |
Originally Posted by rx7twin
i want 4 sets please is that ok?
Originally Posted by Giampiero
A couple of questions;delivery date,are these ready to ship?
Why I have to pay you instead of FD Newbie Imports? Thanks Giampiero,ready to pay. ~Ramy |
Originally Posted by FDNewbie
Because Ramy is underpaid and overextened So Jason (aka BlueRex) helps me keep my sanity
Thanks Jason |
My list:
cbf246 wadejg - PAID artowar - PAID Northern7 Noxlupus - PAID Stonewall7 - PAID Phantom_FD - PAID Giampiero - PAID |
Payment and PM sent!
|
I'll take one. I also need the price on the genuine RE A. Covers for the sleek light kit. You never replied. Thanks a ton guys, Mike
Edit: PM Me the paypal. |
Originally Posted by Mdessouki
I'll take one. I also need the price on the genuine RE A. Covers for the sleek light kit. You never replied. Thanks a ton guys, Mike
Edit: PM Me the paypal. |
All times are GMT -5. The time now is 11:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands